I have a IBM x345 running BE 9.1 with an Adaptec SCSI card attached to a HP Storage Works vs80. The theoretical speed of the drive is 360MB/min. If I am lucky I am getting about 180. I have read throught the numerous posts on port settings, network traffic, etc... Nothing seems to help. Agents...
I have a W2K server and I am trying to change the NIC. When the new NIC is placed in the server and configured, I get "Duplicate Name Exists On The Network" during boot. The server's name hasn't changed, only the NIC. (The IP is the same as well.)
Any ideas?
TIA
I have recently installed a EXP300 via ServeRaid 4-lx on a IBM X330. For all intense and purpose, it is funcitoning, however, the throughtput is doggedly slow. After some research, it looks like it is a known issue but haven't found any tips or tricks to make improvements.
TIA
Chris
I am getting several backup failing due to a00084f9 HEX
errors. The reason and help from Veritas is untrue and horrid to say the least. They chalk it up to NIC teaming...well..I am not teaming the NIC's. Anyone else having these issues?
I have an IBM X345 with a Adaptec 29160 PCI SCSI adapter connected to a L200. Whenever I connect the L200 to the SCSI card and boot the machine, the card returns a SCSI configuration error 02. When L200 is turned off, the machine boots properly. I have talked to Adaptec and they have...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.