Search results for query: *

I have only one rack of servers, with the rack currently having about 8 servers/Powervault,SAN. I want to reorganized the rack, because of the cable mess it has, and other things (Im sure you know what I am talking about). First, it is recommended to place switches inside a server rack...

I have and it fixes the problem, but I want to get to the root of the problem as to why this is happening. Any suggestions.

I have situation where some users after some time can not access thier map drives anymore. They get the error: "Microsoft Windows Network - The local device name is already in use. The connection has not been restored." All PC's are XP connecting to a W2k3 R2 server. Pc's are mapped...

I want to block streaming music/videos that are encapsulated by port 80. Does any know how to do this on a 2621 router.

Building configuration... Current configuration : 3693 bytes ! version 12.3 service tcp-keepalives-in service tcp-keepalives-out service timestamps debug datetime msec service timestamps log datetime msec service password-encryption ! hostname cisco2621-2 ! boot-start-marker boot-end-marker ...

As you can see from my two NICs, the only access-lists in use are 102 and 198. Access-list 11 is not in use according to the configuration. I decided to delete access-list 11, since it wasnt needed. When I did that no clients on the internal network could access the internet. Why would...

I finally got my vlan to work. However on the switch there are different modes you can set on the ports. I checked the documentation for the switch, but would like some clarification. Some ports can be in Access, General and or course trunk mode. I understand the trunk mode. That is when you...

Thanks for all your help, but it was a default gateway issue with the client. I fixed that and they are communicating now.

I am just trying separate two networks 11.x and 13.x and be able to communicate between them via this router. The networks are currently not speaking to each other.

I am trying to ping computers on the other side of my test network. I cant ping any computer from .11 to .13 networks and vice versa. What is wrong here? ================================================ Building configuration... Current configuration : 740 bytes ! version 12.3 service...

What does a native VLAN mean? Cisco documentation states that if you have VLAN1, then that is the native VLAN. What constitutes something as being native. Suppose I didn't have VLAN1, but have VLANs 4,5,6. What would make one native as opposed to the other VLANs. Second question... If I...

Ok.. I am so frustrated with vlans. My first setup is regards to the physical setup of a vlan. I have a dell 3348 switch. Ports 1-24 and 37-48 are VLAN1 IP 192.168.11.19. Ports 25 - 36 are VLAN 2 IP 192.168.13.1. Both are 255.255.255.0. VLANS cant communicate with each other unless...

Just started a new job and the network is so confusion and I believe wrong. Not too familiar with Cisco so here goes. My company uses 192.168.11.x/24 and 192.168.10.x/24. I have one DHCP to assign both ranges to clients. The primary scope is 192.168.11.x (Default Gateway: 192.168.11.1), but...

I am new to access-lists, but is there a way to delete a specific entry in the access-list.