Anyone have -or- know where I can download (get a copy) of the CLARiiON ArrayGUIde software, or perhaps...
Navisphere Agent & CLI v3.x - v4.x
Navisphere Manager v3.x - v4.x
EMC no longer supports/distributes these software, and they no longer require licenses.
If anyone has the installation...
Man i'm with you,
I've searched EVERYWHERE for some clue on managment software, and more importantly the utility for doing the "NetROM download" of the new flare codes to the CLARiiON FC5400/FC500....
I know the software is called ArrayGUIde. and there was a DASSMGR version for some...
There are two modes the serial port can be in.
Serial Application Mode (what your in)
where after post, it goes in to this mode, to allow for Management Software communication...
Your looking for the FCLI...
Type: {}{}
That should break you out of SAM...
then type MENU
select FLARE
select...
Ok, the PSU is actually caled a SPS
Standby Power Supply, although what it is, is a UPS (uninterruptable power supply)
The SPS has a input of 100-240V, and output of 220V
Although with most SPS's the actual Management portions of the UPS dont function with a 110V input. i.e. The Array wont...
It's actually a combitation of truths, based upon not only disk size, but disk speed...
I'm assuming your 18GB drives are 10000RPM, and the 73GB drives are 7200RPM... (cuz that's more than likely)
(d3funct's comment is mute, cuz this isn't a Symmetrix, it's a CLARiiON ;)
Now most DBA's are...
Ya, what they said ;)
Seriously, all you need to acomplish the multi-disk-presentation is the *AccessLogix* software license. (if you have/use Storage Groups, inside Navisphere Manager, then AccessLogix is installed/enabled).. Also you can verify this by right-clicking on the storage array...
I have extensive experience with the CLARiiON FC & CX Series arrays, (mostly EMC OEM'd)....
Data Replication over a WAN requires:
(2) CX600's
Navisphere Manager
AccessLogix
MirrorView
& maybe SnapView
Using MirrorView/IP you can do remote array-to-array volume mirroing over your IP network...
Here's the Answer you've been looking for...
You'll need to verify a few things first....
One you'll need a serial cable to do the re-initialization (mainly to setup the IP addy)...
And you'll need your existing management station/software.
To Reset a CLARiiON FC4500/FC4700, you have to...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.