Any ideas on how the line should be configured on the cisco??
The settings I have are:
line 5
no exec-banner
length 0
width 0
transport input all
stopbits 1
The data seems to go through the as when I do a "sh li" the number of "Uses" increases each time I send a print job through.
Tty...
Hi,
I am trying to connect a "Zebra TLP 2844" printer to an Cisco Access Server 2500 series via it's Async port. It has a DB9 female connection on the back.
From the website www.cisco.com the pinouts for the RJ45 end of the async port are as follows.
1 CTS
2 DSR/DCD
3 RXD
4 RX/GND
5 TX/GND
6...
Hi,
I have installed and configured OpenSSH 3.0.2p1 on a Linux Redhat 6.2 (Server - Lurch) and also on the client(Goofy) which is also using Redhat 6.2.
When logged in as root, using Pub. Key authentication works fine. The Log is below:
[root@goofy dbi]# ssh -vv lurch.maynick.com.au...
Thanks for your help. I have done this in the printer interface script and this works. It is also possible to do this on the cisco by specifying a printer ie
printer xxxx line 6 newline-convert
Philipp
Hi,
We have connected a Lexmark S1650 printer to one of the async ports on the access router. Sending Characters down the line, by telneting to that line the the router ie line 6 - telnet xx.xx.xx.xx 2006 causes the characters to be then printed out after sending down a Form Feed (^L) to the...
Hi,
At the moment our system (10.9.3.*) is setup so print jobs are sent to a certain port on our stallion, and this port is connected to the printer. This works fine. We are currently also setting up printers on another server, which is on a 10.2.* subnet. Having setup the printer on the new...
I have installed IAS from the NT 4 option pack in order to use our PDC as a Radius server using the NT domain user Database for authentication. The Radius Server is used to authenticate users logging into a Cisco 2500 Router.
The problem is that the authentication works fine when someone that...
Hi,
I have a problem that maybe someone can help me with.
We have a tacacs+ server on a 10.9.3.* subnet. EasyACS running on a WinNT 4.0 server. It is configured to use a NAS that is on the same subnet for a RAS dailup that is setup.
The problem is that I want to authenticate users via...
The problem was that one of the files on the directory I wanted to restore was on tape 391...but the system couldn't find it...the other files in the directory on tape 394 were sucessfully restored. Now I just have to get tape 391 out of our safe!! heheh
Thanks you very much for you help...
Thanks for the reply...
Before I tried to recover the directory, I used nwrecover to check for different versions of the file and on which tape the file was on. I then subsequently mounted this tape through nwadmin. I changed time to recover the correct version and marked the directory for...
Hi,
We are running DG/UX Unix...Using Legato Networking as our backup software. Trying to recover a directory from one of our previous backups through nwrecover I get the following error.
NSR Server 'servername' busy
mwrecover: waiting 30 seconds then retrying.
I have tried stoping the...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.