Search results for query: *

According to the telco, the PABX isnt allowing the calls to terminate despite all my DID tables being programmed as per the prefix 3014700 I've also attached their trace results in case this may help in identifying the fault. Aceton

@obtsystems....thank you for your response. Yes I have all green lights on the PRI card..... I've also tried enabling and disabling the crc4 setting but have had no luck.....CRC4 is currently set to Disable. I will ask the local telco to double check their end. Thank you again for your...

Thank you @kizo for responding. I have entered the numbers (3014700) in the DID table as per their provision but I still cannot get it to work....... Aceton

Hi everyone, Would really appreciate some help to translate this trace that I've run on a customers Panasonic TDE200....The local telco did an unexpected migration from fiber to Copper without advising the customer and now their ISDN service isnt working, both incoming/outgoing calls aren't...

My apologies for not indicating..... I'm in Papua New Guinea Aceton

Hi All, I would really appreciate some help getting firmware V8 for both MPR and DLC16 on a TDE200. I've installed 5x DT543's but getting only O's on the screen and found out via this site that I need to upgrade MPR and DLC's firmware in order to get the DT543 phones working. I'd be very...

Thank you very much WhiteGooner! Appreciate the response. Aceton

Hi all, Was wondering if more than one PRI30 card (for Wireless GSM PRI service) can be installed on a TDE200? Aceton

found the solution in 20-03-04.............changed from 1 to 5......all working! Aceton

Hi all, if anyone has this same issue similar to the link below posted by @John in Texas Link I changed my settings in 20-03-04 from 1 to 5 and works like a charm. FYI we use ARS.....this setting is for SLT & ARS users as stated in the features & Specs manual. Hope this info helps whoever...

Hi all, this is me first post on this site and would really appreciate some help with this. this is the scenario: I have a SV9100 and we are facing an issue with dialing out via a ARS. the Access code for dialing out is '0' and if we pause for at least 2 seconds especially if its a number...