Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by Zero6

  1. Zero6

    Ip office cold start and power failure

    Hi All, Today a client noticed something on there avaya ip office V2 500 r9. In the status they saw cold start in event type and also power failure. The time this happen is in the morning, during the day there was no issue. They did replace the ups today just to be safe. So will check with them...
  2. Zero6

    Call forwarding NEC8300

    Hi all, I am trying to activate call forwarding all on a NEC phone that is from the DT800 series, but I do not see the option in the phone. Does this need to be activated in the NEC9300 pbx? If so, might someone have the commands to program it so it can be activated and deactivated? I have been...
  3. Zero6

    Certificate warning

    Hi all, I recently keep seeing this certificate warning keep appearing on the phones. I logged into the avaya server edition (ip:7070 or ip:7071, can't remember which on it was again) and regenerated the certificate, but still it keeps reappearing. All the certificates will expire around 203x...
  4. Zero6

    UC module status shutting down

    Hi All I manage to get my hands on version 11.0. When doing the reinstallation I got the message: "An error was encountered while activating your storage configuration. Could not commit to disk /dev/sda. I saw in system status the installation reaching 5% and after a while it shut down. So...
  5. Zero6

    UC module status shutting down

    Hi All, Sorry for the late reply and thank you for the suggestions. I connected a monitor to the UC module and saw that the message error 16: inconsistent filesystem structure I pressed on of the keys and got the options: centos, linux, uc module. Tried them all but no success, So the now i...
  6. Zero6

    Nec 9300 extensions hear the auto attendant

    Hi all, Suddenly all the analogue extension from 8501 to 8540, when you dial them internally, you hear the main welcome Auto Attendant message playing, instead of phones ringing. Also they call from any of the 85xx extension to any other extension internally, you hear the phone ring, but the...
  7. Zero6

    UC module status shutting down

    Hi all, I have a question a client moved from their old location to a new location and when they mounted the avaya ip office v2 back into the rack, it seem somehow the uc module is not working. I logged into system status and I can see the ip of the module, 192.168.42.2, but with status...
  8. Zero6

    Siptrunk user name questions for ip office 500V2

    Hi derfloh Sorry I forgot to add the user name has a "+" infront of it I tried with the following steps, but it didn't register Itsp domian name: mts.aru.tel.com ITSP Proxy address: used ip of the provider that was given that the pbx should reach In sip credentials I filled User name...
  9. Zero6

    Siptrunk user name questions for ip office 500V2

    Hi All, I wanted to know if avaya ip office when registering a sip trunk can accept a user name like for example 4687226@mts.aru.tel.com Can Avaya ip office accept this type user name in this format? This not the real user name, but the format that the provider is providing is in this range. As...
  10. Zero6

    Avaya 1616 display screen not showing the dialed number

    Hi All, I installed a 1616 D01A-003 phone and it works, I can make and recive calls. But when I press a number to dial or extension, it does not appear on the screen. I search for this and found this, but there is not Phone screen on callling --- Press Home. Press Select to select Options &...
  11. Zero6

    Connection to control unit restarted message

    Hi Sizbut, Did started this Monday after programming a J139 I deleted that ext for j139 just to be sure.
  12. Zero6

    Connection to control unit restarted message

    Hi all, West: Yes the server stays up and phones restart and I have restarted the primary server. Sizbut: the firewall does the routing for the network, all 3 units (Primary, secondary, control unit) ip are put in the same routing policy. The pbx gives ip to the phones. I also did ping to see...
  13. Zero6

    Connection to control unit restarted message

    Hi All, I have an issue with an avaya server edition. It seems that the avaya server edition sends a message that connection to the "control unit restarted" THis is the primary server and then you have the secondary server and the control unit that has the E1 trunks on it for some reason after...
  14. Zero6

    How to send internal calls to voicemail and still recieve incoming calls from the outside

    Hi All, At a client I have a server edition 11.1.24 and the clients wants that internal calls paly a message between 12pm and 1 pm that the office is cosed for the other collgues, but still wants to recieve incoming calls from the outside I have programmed a message with voicemail pro, but it...
  15. Zero6

    Phone goes to speaker phone immediately

    Hi All, I have an NEC SL1000, when the user dials an extension either internal or from external, that phone goes to speaker immidiately. Is there a way to disable this feature? Thank you in advance

Part and Inventory Search

Back
Top