Recent content by xs650

Migration with a restore of the backup is only possible from V2 R7 to V3. A license migration from V1 to V2 and then to V3 should be possible.

root and your root password If you have used the ova version root and right

If you are using an OCCBL/OCCBH with the OCCLA update to V3 MR3 FR1 HF5, there is a dsp blocking issue solved.

This can be done via SDHC card manager. You can download this tool at the unify web side(if you have an account).

Hi, IPv6 is only needed during the start of the ocab. If your network is not IPv6 aware you can use the workaround with the second LAN cable between OCAB port 1 and admin port of the mainboard. You have to switch off the system before you connect the second cable.

It depends on the mac and the used software. So every X system has its own root password.

IPU only can only handle H323 and not SIP. There still exists a SIPU card where you can connect SIP extensions but still not SIP trunks.

In which country are you located? I think there is a switch at the power supply for the ring frequency (25, 20 or 50Hz). If it is set wrong you have no ringtone at the analog ports. As far as I know: USA needs 25 HZ, France needs 50Hz and the other international markets 20 Hz

It still depends on the used power supply. The newer OCPSM only supports SLAV but not SLAD cards.

The batteries are not compatible.

Try to start the CPU only and unplug all other cards from the system. If the cpu only is not starting change it with another one.

Try this string: &FZE0Q0V0B0X3&D2S2=29S0=0 If B0 (auto speed) is not working try B5 (1200 baud).

sip@home: you are using at home a sip device device@home: you are using at home a HFA system client (CP HFA for example )

For the native sip trunk feauture you need a networking license.

You can create more then 5 lines but you can only use 5. This is how it is working.