Hi,
IPv6 is only needed during the start of the ocab.
If your network is not IPv6 aware you can use the workaround with the second
LAN cable between OCAB port 1 and admin port of the mainboard.
You have to switch off the system before you connect the second cable.
In which country are you located?
I think there is a switch at the power supply for the ring frequency (25, 20 or 50Hz).
If it is set wrong you have no ringtone at the analog ports.
As far as I know: USA needs 25 HZ, France needs 50Hz and the other international markets 20 Hz
Without OCCB you have 8 DSP channels on the mainboard.
One dsp channel is minimum reserved for the Moh.
That means without OCCB you have max 7 free DSP channels.
You need a dsp channel when you are going from ip to non ip.
That means when you have only IP phones and only SIP trunks you don´t...
Hi,
I use a eMG80 (5.1.12) connected to another vendor PBX via SIP trunk.
I want to send different numbers in the sip invite in the from header user part and display part.
Example: I want to send 8300 in the From display part and 300 in the From user part.
300 is the station CLI.
Is this...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.