Recent content by Travis Harper

Thanks for the clarification. I guess since it works at your location, but does not work at the clients location, and otherwise all things being equal, you are likely on the right path. The issue could be related to signal strength or interference from other wireless devices at the client's...

I have never had any experience with the GSM gateway, but the problem you are describing sounds like a NAT issue. I ran your question through ChatGPT and this is what I got back. It sounds like a tricky issue, especially since the problem is only occurring at the client's site. Here are a few...

Yes, the SMDR can capture twinned calls. https://documentation.avaya.com/bundle/AdministeringAvayaIPOfficePlatformManagerR11_1/page/SMDR_Fields.html It's tagged as External Targeting Cause, and the TargetedBy Reason Code to filter on is MT ( Mobile Twinning ) Example Outputs. Mobile Twinned...

I think you will need to enable IMAP on the maibox being used in voicemail pro.

If the Max call is 3600 seconds, then that's just 1hr, and the voicemail in question exceeded that limit. Change 3600 to 5400 and see if that helps. That will set the cap to 1.5hrs.

Can't you just log into the user portal, and toggle it there?

64 MB Voicemail?? Good Grief man! That's an hour long voicemail. In any case, It sounds like the issue you might be having is the time limits. 64MB VM, sounds like a little more than an hour long voicemail. Check In Preferences > General in VM Pro. What is the Max call / VRL Record length...

You will need to check the logs. What are you using for an outbound email server? If your ISP provides an SMTP server, this is your best option.

In that case navigate to the address of your IPO/46xxsettings.txt file in a web browser and copy it. Save it to a local web server those phones can access, and then manually change the file server address on the phone to the new webserver hosting that 46xxsettings.txt file.

Also, the trunk licenses are split between them. If your capacity reqirements are 100 today on a single server and you add a secondary, your capacity per server is now 50. Keep that in mind.

I've always struggled with this myself. Using an external firewall woth port forwarding the signaling and RTP, I've used Open Internet.

Its usually related to setting the NAT Type correctly, and/or RTP range not being setup properly in the firewall.

Sorry, I misread. I thought you confirmed the phones all got the certs. If they don't have the certs then that is 100% the issue. Factory reset the phone and let it pick them up again on reboot...as long as you are using the auto generated 46xxSettings.txt file.

Are there entries in "Allowed SIP User Agents" and if so, the User Agents of those 5 phones different from the other 25 in any way.. including Firmware version.

I keep coming back to this post, as it has me stumped.. and like a dog with bone, I can't let it go. I did manage to find this bit of information that might be useful. Source: https://en.wikipedia.org/wiki/Telephone_numbers_in_the_Republic_of_Ireland The majority of area codes in County Donegal...