Recent content by tmnt1981

Hello all, I am replacing a Avaya Definity Microwave with an IP office and had a question regarding overhead paging. I am trying to determine if the Lucent 909 Universal Coupler can be re-used as the telephone paging adapter on the IP Office? Right now it is being fed by a Aux Trunk Card. I...

Yes I know. Its an odd request but since it worked with an onsite email server the customer is convinced it can work with a relay. My company is getting a quote out to him but until then I thought i would through it out and see if anyone had anything to contribute. I did also try using stunnel...

I have a customer that had voicemail to email working on a 2.1 system. They had a onsite email server then recently switched to office 365. Switching the vmpro email settings to the office 365 obviously did not work. I then attempted to use the tried and true smtp relay through gmail. I have set...

Update 10/27/17 Resolved by checking Start TLS in System/SMTP. Alarms have been emailing since.

I have a customer that another engineer configured system event alarms up for when 911 is called. It was configured using a snmp trap which hit a distribution list. This worked for around a year and half and now it mysteriously has stopped. This coincided with voicemail to email working and then...

Thanks janni78, that is what another engineer I work with said. He has had success with IP flex with Mitel systems and he said the same thing. Thats a mistake on my part. I'm contacting the customer and will make the change. It should be 192.168.1.1 and 192.168.1.2 is the address for Lan 2. I...

Here is a trace in SysMonitor 17:40:51 513456322mS SIP Call Tx: 17 SIP/2.0 487 Request Terminated Via: SIP/2.0/UDP 192.168.1.2:5060;rport;branch=z9hG4bKf4ffc6ababc5966c61ee4c58cbbffc45 From: "Extn362"...

Initially they were, but since AT&T moved the sip handoff to a separate interface we are bypassing the firewall.

Hello all, Has anyone successfully implemented an IP Office with an AT&T IP Flex SIP Handoff with no SBC? I have been working on this with no success. I followed the devconnect document for 9.0 (https://www.devconnectprogram.com/fileMedia/download/a00e94f3-0f07-4913-9ac2-6bd83419e63c) but am...

Thanks guys, its not going to be complicated from a call flow programming wise. Its being used for all analog phones in a building in Chicago. I was just seeing if anyone has encountered this and looking for a new perspective on it. I have another question regarding the voicemail. Some...

Has anyone had any success in loading a config from a IPO 412 Release 3.2 to a IPO 500 V2? I am doing an upgrade from the 412 (also 8 analog expansions) to a new IPO 500 V2 Release 10 with 8 new analog expansions. Its essentially a swap for swap equipment wise. I am just trying to save some time...