Recent content by The mitel guy

Just thinking of ideas that might lead to solutions... sorry i didnt realizie it was that mission critical thanks.... i cant program vb at all but i understand the os pretty well...

To be honest, my recommendation, if you need any level of control of a PDF printer is to use CutePDF or BullZip PDF (the latter being my current preference) I like this answer sounds like he has seen something like it....

Macros in excel or open office can and will acomplish alot of tasks... worth looking into...

Can you tran an ai to do it for you?

The mx is a great controller.. i ignor the alarms and logs... as long as the customer dosent notice any operational issues just let it go... no complaints over operation equals no problem..very basic i service hotels i only fix complaints.. i see this in the logs alot lol if its down its easy to...

I looked for dean enterprizes but i cant find him... he is a good dealer too!

buy a drive with software on it from Istreamcom.com its a typical mom and pop type company. I shop with them as well..100% positive feedback from me..

Strip the cards frim the controller and see if it boots with out them...

If the machine was exposed to a lot of heat The board can warp and have errors like an xbox 360 with the red ring of death... I had a icp that had this issue... I loosen screws on the mainboard cover off and heated it with a hair dryer and got it to load one last time so i could get the cde...

Istreamcom.com can help they have parts..

That controller is stuck in boot loop... Something is bad in the controller... Memory corrupt... i hope you have a database back up... use the com port 9600 n 8 1 baud and watch as vx boot up how far does it get? I get the feeling it could be a bad dsp or a bad quad cim. I suspect system...

When calling a DID do you get busy tone.. CO error recordings? Dead air? You will need a routing rule think a wildcard is uri * going to desired controller Something about this but like on the carrier translation for an ip or nat rule this is haunting me.......🤔

Who is your carrier? Not at&t right? Saw some simmilar issues on as nec sv8100/9100 Turned out to be the carrier rejecting the call due to protocols on there backend... however that was 2 nec systems using sip talking on a deticated circuit... it was never a programming issue on our end but a...

How many digits to asorb Asorb from left to right...if the did digits sent is 8 and the number dosent need to be modified then the ext should match the did If you have a 4 digit ext you would strip 4 Mod 0 and match ext number to did.. or use a did translation table ext 1010 = did 9950 if you...

I use open office for documents.. it has a pdf creation functions... it can use macros. it has auto save functions in the application it might be worth looking at.. Ocr and file output type is worth a google search too...