Search results for query: *

I'll sell you a brand new phone system and you can dump that in the garbage. The 9100 and the 8100 as far as I know are manufactured discontinued.

LOL good luck the software for that phone system can be a real b**** to track down if you don't know somebody that's got a copy. You might be able to access the phone's programming through webview. I don't know if that'll let you upgrade software I don't remember the information is out there but...

The non-registering of the MAC address I finally realized something else probably registered the Mac check your network to make sure that you don't have any other broadcasting devices serving DHCP within that same network. The only way that you can ever do something like that is to have vlans...

I hate to refer you to the manual on this but it's a little deeper involved from my perspective and I'm not really sure what to guide you on next. I was thinking that maybe those sets if they are newer have the wrong firmware and that could be why they don't work right but if they were working...

I posted link to this from we do phones but they are running on HTTP only which could be hard to download from. But regardless all of these Tech tips right from the manual and I found the manual to be the best source of information on that phone system it's well written

2nd set of images

See attached screenshots chapter 7 ip device troubleshooting

Make sure it's the release 3.1 handbook. In the release 3.1 handbook if you look in the barry front section it says troubleshooting IP phones and connectivity issues and the chapter for that starts on page 280 of the book and it goes to like 2 296 I can take a screenshot of one of the pages and...

I would contact your mitel vendor and ask them to update the software on your phone system and your telephones. I'd ask for the latest firmwares and the latest softwares available. That's the only solution that I know

I think you need to use a direct trunk select and select each trunk individually until you find out which ones don't have connect with the phone company. If it doesn't connect with the phone company it needs to be disconnected from the phone system in many ways due to licensing.

http://www.wedophones.com/Manuals/Mitel/Mitel%20SX-200%20ICP%20Rev%203-1%20Tech%20Handbook.pdf

Let me start off with saying sorry for taking so long to get back to you. Google search mitel sx200 ICP 3.0 handbook page 280 near the bottom of the book starts the section that you might want to read. I highly suggest you download and follow the instructions nobody can explain it better than mitel

The real question is is it causing any issues? If not I would simply ignore it. You might even be able to change system alarm level thresholds in order to ignore this alarm or you might even be able to disable the feature entirely who knows? I don't work on the 3300 very much

Using auto attendant to answer the call then transfer the call to a phone that is physically on the system but does not have a telephone connected does not have any ring out timers and is not call forwarded. While the call is being routed to the extension that is ringing the user will experience...

You can put an auto lifter on a handset that when the phone rings the auto lifter picks the handset up and then you pipe the sound directly into the receiver

If you're interested in learning how the passwords can be reset on a mitel sx200 El ml ICP MX ax and CX, or if you would like to know how to change your system licensing. The systems are no longer supported and Licensing is no longer available as far as I know. So I have one single video on my...

I had to learn NEC 8100/9100 on the Fly. My experience with it was it has wonderful features but when s*** goes wrong on that phone system it can be a nightmare to fix sometimes. Most of the time I ran into software issues where phone systems would just lose memory for no reason phones would...

Hey you beat me to the punch LOL I was going to tell him to Google search up wake up announcer

Nec is a piece of shit phone system compaired to mitel. i worked on both i love mitel i hate nec as much as hitachi but for different reasons. Hitachi is hard to grasp. Nec is just a failure prone piece of shit.