Recent content by techalum

That is correct. I am looking for a way to connect to VPN via certificates.

Hello everyone! I have an issue that even Avaya can't seem to figure out. After the POODLE vulnerability in October showed up, we were forced to change our settings on our firewalls from aggressive mode to main mode. The Avayas use aggressive but can use certificates as a way around that. At...

Webster and TLPeter, Thanks for the information. The only thing for the settings on the phone for the 46xx on the config screen is aggressive and identity protect. I will also take a look at the 96xx text file. If you can think of anything else, please let me know. I will post my resolution...

I have run into a new problem. We have several users that work remotely and use a 4621 IP phone. They were all able to connect properly to our phone system and work without any issues. However, a new vulnerability came up when we did our monthly PCI scan. It is an issue which requires that we...

Hello everyone! I really need your help with my problem. I have two G3 systems that are causing me a headache. We are doing office to office dialing (5 digit dialing) from the US to the UK. The calls between the offices sometimes drop after about 20 seconds. At times, it will happen multiple...

Hello everyone! I am having issues between two offices. When dialing via extensions, the call drops after 20 minutes. One of the phone systems is in the US office, the other in the UK. I have tried dialing other offices from these locations such as Switzerland and South Africa and I do not...

I can't find anyway to setup VLAN1 with an ip address. I use the question mark and can't find a way to setup an ip address with a vlan. Force10(conf-if-vl-1)#? description Interface description end Exit from configuration mode exit Exit from...

I have a brand new force10 switch. I plugged it into the network and gave it a management IP address. I can reach anything witn our network. But I can't ping out to the internet? I know this is something very basic. But I am a phone guy and they keep throwing this network stuff at me.SH RUN is...

Thanks guys. I have attached a basic topology in word. I will be brief with the description below. Our connection begins with a 2600 series cisco router which is maintained via Air Band. We then have the following: VoIP phone switch on the outside Firewall (sonic wall) then a WAN accelerator...

i appreciate your help and hate to beat you down with these basic questions. burtsbees, it looks like you are saying i do not need to make changes to a router or create a vlan? is there a document that can walk me through all of this? I hate to lean on everyone so much. But I will take as much...

What about the router? Wouldn't that need to be changed as well? How would I create a second class C without having a second DHCP server? PLease excuse my basic questions. I am a phone guy trying to survive a network project. Here is something I just found out... We already have devices using a...

Hello all! Newbie network guy here. I seem to do the phones but always get called to do network stuff. So hear is an easy one for you. We have a class c network and have just run out of addresses. The company wants to move to a class A subnet. My thought is that I can change the IP on all...

I saw some cabling techs using some RJ-45 plugs with lights on them. They would place these on the patch panel and another tech would put a tester on the jack in the offices. The light would illuminate the connector that was placed on the patch panel. From that point, the techs could docuemnt...

The 3750 was err-disable. i did a shut no-shut and then checked out my 2924. I can now ping out to the internet!!!! Thank you vipergg!!!

it does not display anything.