Recent content by tarikkk

No in my knowledge it allows less than that . That's why we add DTRU daughter boards to allow more communications But I didn't see any problem adding boards even if we pass 96 extensions

Hi guys Even if the 1st cab can handle only 96 or 132, you can use more extensions, the only problem is that all 96 or all 132 will not speak at same time (which is not very probable)!!!

Sorry guys Forget about my post It seems to be the same PGM code but we have to wait a while to get the number Sorry again

Hy everybody How can we get the S/W serial number of ipLDK20 in order to have key license for IP trunking from LG. I know that on LDK100 it's PGM78, but when you use this on LDK20 PCK is empty and I tried it on several ones. Someone has an idea. Thaks inadvance

I know wat there is in my country (it' 30 chanels) My problem is with the panasonic board tht I've never installed before. So I need to know how many chanels the panasonic board supports??

I think so, but the documents say 23 chanels??!!! That's why I'm asking, did you used this board before?

Hi guys I need to connect a TDA100 to an Ericsson system through a Qsig trunk. The Ericsson Qsig board supports 30 chanels, but it seems that TDA board supports only 23 Is the connection possible, or the TDA can only be connected to panasonic systems????

Thanks a lot for everybody (specially Doktor). It's the best forum ever. We learn everyday something new.keep going on guys!!!

yeah "all's well that ends well" Because we can do what we need to do (making VOIP calls) But the mystery still complete about the ping or may be it's as you said " PBX is blocking ICMP at layer 3, but allowing layer 2". but why this is not true in other networks?????!!!!!

Unfortunatlu not I'm in charge of the PBX only There's another guy from another company that's in charge of the data router of teh building, and he's not very helpful everything is no for him

No, I didn't try this because the 80 adress is the id adress of the network, we have only six adresses from 81 to 86, and I tried all theses adresses

Ok abl2910 It works, but as you said you can not decease it too much otherwise you can not dial at all!! Thanks a lot

I thought Inter digit timer was for time between the digits entred by caller. exemple: when you enter 100 the inter digit time is the time between 1 and 0, then the other 0. But I will try it tommorow and see. Thanks both!

How come I can ping the PBX on the same LAN? If PBX blocks ICMP I wouln't be able to ping it locally. Yes I've already switched the adresses, same problem!!! I've already called the constructor he said "never seen this problem before"!!!! for him the problem is on the network

It's already done for PGM160 The problem is not that the message is repeating but the time between the end of the recorded welcom message and the moment it ring at station is about 7 seconds and this is too long. I thought about a hunt group but would I have the possibility to access DISA, I...