Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  • Users: tarikkk
  • Order by date
  1. tarikkk

    Can this unit handle 1 card more? LDK 300

    No in my knowledge it allows less than that . That's why we add DTRU daughter boards to allow more communications But I didn't see any problem adding boards even if we pass 96 extensions
  2. tarikkk

    Can this unit handle 1 card more? LDK 300

    Hi guys Even if the 1st cab can handle only 96 or 132, you can use more extensions, the only problem is that all 96 or all 132 will not speak at same time (which is not very probable)!!!
  3. tarikkk

    how to get serial number

    Sorry guys Forget about my post It seems to be the same PGM code but we have to wait a while to get the number Sorry again
  4. tarikkk

    how to get serial number

    Hy everybody How can we get the S/W serial number of ipLDK20 in order to have key license for IP trunking from LG. I know that on LDK100 it's PGM78, but when you use this on LDK20 PCK is empty and I tried it on several ones. Someone has an idea. Thaks inadvance
  5. tarikkk

    Q-Sig trunking on TDA100

    I know wat there is in my country (it' 30 chanels) My problem is with the panasonic board tht I've never installed before. So I need to know how many chanels the panasonic board supports??
  6. tarikkk

    Q-Sig trunking on TDA100

    I think so, but the documents say 23 chanels??!!! That's why I'm asking, did you used this board before?
  7. tarikkk

    Q-Sig trunking on TDA100

    Hi guys I need to connect a TDA100 to an Ericsson system through a Qsig trunk. The Ericsson Qsig board supports 30 chanels, but it seems that TDA board supports only 23 Is the connection possible, or the TDA can only be connected to panasonic systems????
  8. tarikkk

    Thank you!

    Thanks a lot for everybody (specially Doktor). It's the best forum ever. We learn everyday something new.keep going on guys!!!
  9. tarikkk

    No way to ping PBX

    yeah "all's well that ends well" Because we can do what we need to do (making VOIP calls) But the mystery still complete about the ping or may be it's as you said " PBX is blocking ICMP at layer 3, but allowing layer 2". but why this is not true in other networks?????!!!!!
  10. tarikkk

    No way to ping PBX

    Unfortunatlu not I'm in charge of the PBX only There's another guy from another company that's in charge of the data router of teh building, and he's not very helpful everything is no for him
  11. tarikkk

    No way to ping PBX

    No, I didn't try this because the 80 adress is the id adress of the network, we have only six adresses from 81 to 86, and I tried all theses adresses
  12. tarikkk

    "your call will be tranfered to attendant"

    Ok abl2910 It works, but as you said you can not decease it too much otherwise you can not dial at all!! Thanks a lot
  13. tarikkk

    "your call will be tranfered to attendant"

    I thought Inter digit timer was for time between the digits entred by caller. exemple: when you enter 100 the inter digit time is the time between 1 and 0, then the other 0. But I will try it tommorow and see. Thanks both!
  14. tarikkk

    No way to ping PBX

    How come I can ping the PBX on the same LAN? If PBX blocks ICMP I wouln't be able to ping it locally. Yes I've already switched the adresses, same problem!!! I've already called the constructor he said "never seen this problem before"!!!! for him the problem is on the network
  15. tarikkk

    "your call will be tranfered to attendant"

    It's already done for PGM160 The problem is not that the message is repeating but the time between the end of the recorded welcom message and the moment it ring at station is about 7 seconds and this is too long. I thought about a hunt group but would I have the possibility to access DISA, I...
  16. tarikkk

    "your call will be tranfered to attendant"

    Hi everyone Can we avoid the time between the end of the message and the ring when DISA is programmed with VMIB annoucement for incoming calls. I mean when you program PGM140 with DISA ON and welcom Message 001, and no digit are entred by the caller waiing for transfer to OP, the time between...
  17. tarikkk

    No way to ping PBX

    Yes I can ping the PBX from my PC on the same subnet That's what's making me crazy But today I found new amazing things: I can do VOIP to and from the PBX through internet The PBX is connected to another one in another country and it works perfectly, but I still can not ping PBX! Sure that...
  18. tarikkk

    now way to ping BP250

    No the gateway is correct on BP config Yes, I can ping BP from the same subnet and from behind 81 router too it's when I'm outside that I cannot ping. I don't know what routing protocol they are using since the routers are managed from other people not me.
  19. tarikkk

    page system

    Sorry te K of my keyboard is not working proprly it's I know and I don't know But at the same time I think that no audio comes out to the PA system if you hang up so what the role of the relay??
  20. tarikkk

    page system

    Yes I now, and tat's the problem But I don't now why it doesn't work when I put the relay between the PA and the Aria, and I hear te relay opens when I dial 545 but no sounds gets through PA I don't know may be my cabling is false because the relay works I can hear it!!!

Part and Inventory Search

Back
Top