Recent content by subzerocool

I still can't connect, is there something I'm doing wrong in my configuration? ASA Version 7.2(2) ! hostname ASA domain-name asa.local enable password AJOQIzHG8x0a6R6W encrypted names ! interface Vlan1 nameif inside security-level 100 ip address 10.0.0.1 255.255.255.0 ! interface Vlan2...

Hi guys, I was wondering if any of you could provide a basic ASA to IPAD CLI configuration. I tried some of the configurations online but can't seem to connect the IPAD to the VPN. Thanks in advance.

It depends on how much you're spending. Since you're using IP phones, you can always get an ASA 5505 10 user which goes for about $400, they have POE ports built in for the phone. If you want cheaper, you can buy a PIX which are old and not really supported anymore but could help, you would...

Anyone?

Hi guys, it's been a while since I worked with MD110's. The system cannot do a dump, the system gets “Congestion” when trying to do a DUSYI or DUBDP. Any help would be appreciated, thank you in advance. Here is the ALLOP ALARM LOG IDENTITY: STATENDAM VERSION: CXP1010115/4/TSWSP07/SP07 DATE...

Are you sure your serial port is working? You can take a key and short out pins 2 and 3 and start typing, if you get a response, it works. Try that first.

I'm sorry to bother you guys so much. Just wondering if there is anything else I'm missing. Please help, thanks.

I checked the nat (inside) 0 access-list inside_nat0_outbound and it's correct. For some reason it didn't past the whole command. Is there anything else I'm missing? These VPN set ups are such a headache, only one side can see the other. I can't seem to see what is wrong, the remote can see...

Supergrrover, I was wondering if there was another ACL I need to create. Please let me know, thanks.

Is there anything else I have to do? I can only see the main site from the remote but the main can't see the remote. Is there anthing else I need to add?

Yes, they are. The tunnel is up. Only problem is that the main site can't see the remote site. The remote site can see everything on the main site fine.

Sorry I forgot, here is the config for the main site: RiversEdgeASA> enable Username: admin Password: ******* RiversEdgeASA# show running-config : Saved : ASA Version 8.2(1) ...

Hello, I'm still new on this site and hope one of you can help me with this. I have an ASA 5505 at the main and remote sites. The remote site can reach the main site but the main can't reach the remote. I was wondering if one of you can tell me what I did wrong, here is the config for the...

I tried what you suggested and it still hasn't worked. Is there something I'm missing? Should I set the peer to 151.199.191.81?

Hi guys, I'm still new to the configuration for the ASA. I tried setting up the VPN but am stumped. Please help me, I am trying to get a VPN going as soon as possible, my config for both ASA's are here, please let me know what is wrong and what to do, thank you in advance: ASA 1 ! hostname...