Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by stevedps

  1. stevedps

    IP 2050 Soft Phone

    Go to the Resource tab, then Telephony Resources, select the IP Sets row, that will open a pain below that check Allow registration and check Allow Global registration then type in what ever password you want. That will be the one you type in when you register the IP phone. After you register...
  2. stevedps

    BCM 4.0 FTP Backups

    I have a network guy looking into this it has to do with the protocol ftp uses. He thinks its about authenticating and he's getting close to making this work I'll post the results.
  3. stevedps

    BCM 4.0 FTP Backups

    I'm having trouble getting the ftp backups to work now that I've upgraded to 4.0 from 3.7. The old one I used the following path xxx.xxx.xxx.xxx//bcm/filename. That no longer works because now the OS is linux and it outputs xxx.xxx.xxx.xxx/.nortel which doesn't work on a windows ftp server. Is...
  4. stevedps

    Changing a PLDN

    I need to know the steps on how to change a PLDN for an existing hunt group? I tried to delete the hunt but it gave me the error the PLDN must be removed first I really just want to change teh PLDN to another number.
  5. stevedps

    Second line appearance

    I have a setup were a user has another DID on button 3 other than their primary DN. The problem is everytime I add teh additional DN it MARPS to it and when you call that DN it follows the forwarding of the primary DN how do I get the additional DN not to follow the primary DN's forwarding and...
  6. stevedps

    Answer DNs/Information Mailboxes

    You should be able to have that option ring a hunt group and set the group up to broadcast and ahve the 3 phones in the group you want to ring.
  7. stevedps

    Alarm browser not working

    I have a release 3.7(400) that I had the alarm browser working but now all it does is say polling. In the alarm manager I changed the maximum number records to 100 then back to 0 and thats when this problem started. I go into the service manager and change the staus of alarmsvr and all it says...
  8. stevedps

    Bluetooth compatability

    I have a user asking me if our phones are bluetooth compatable, this is some type of hearing aid device. My question is are meridian m3903 and m3904 compatable with this device?
  9. stevedps

    PCA Length

    I have PCA setup on my system to dial cell phones, right now with the hot key set to key 1 hot p 8 9xxx-xxxx, this setup the caller rings both the desk phone and the cell at the same time and then goes into the desk voce mail which is what we want. When I change the key to key 1 hot p 12...
  10. stevedps

    What's the difference between SIP trunks and H323 Trunks

    What is the main difference between SIP and H323 trunks and how many ports are there on each one?
  11. stevedps

    BCM the difference between SIP trunks and H323

    What are teh differences between SIP trunks and H323 trunk for a BCM?
  12. stevedps

    Flash downloads

    Below is a print of my fdl in ld 97 I originally had it set to all for types but it didn't run last night. Now I can't get the day schedule to go away or change it. Anyone out there know how to schedule flashes REQ prt TYPE fdl FDL DATA SET TYPE: 3903 DAY: FRIDAY NUMBER OF INTERVALS: 01...
  13. stevedps

    Day light savings time

    I'm not getting the year to set by folowing these commands out of the NTP's, how do I get the year set? To implement these commands, use the following: ? FWTM <month> <week> <day> <hour> month = 1-(4)-12 [January-December] week = (1)-5, L [1st-5th, L is the last week of the month] day = (1)-7...
  14. stevedps

    DID numbers not in use

    Is there a way to get a caller to get busy or reorder tone when they call a DID number in the switch that is not in use yet?
  15. stevedps

    Printing out phantom loops

    I need to know were I print out loop information espesially phantom loops.

Part and Inventory Search

Back
Top