Recent content by sosolid

Thanks for all your help on this - I think I'll bounce this one back to the vendor. Regards, Rory.

No, I've set up three CDP numbers today and the 4-second delay is on all of them (except when you dial 7103 beforehand, and then it's 8 seconds). Any reason why the delay is twice as bad when I dial 7103 beforehand?

That gives me this: RLI 7 ENTR 0 LTER NO ROUT 3 TOD 0 ON 1 ON 2 ON 3 ON 4 ON 5 ON 6 ON 7 ON CNV NO EXP NO FRL 0 DMI 0 FCI 0 FSNI 0 BNE NO SBOC RRA COPT 1 CBQ NO ENTR 1 LTER NO ROUT 23 TOD 0 ON 1 ON 2 ON 3 ON 4 ON 5 ON 6 ON 7 ON CNV NO EXP NO...

you'll have to excuse my lack of knowledge on this, but I can't see a route list 7. Here's what I got: >LD 22 PT2000 REQ TID TAPE ID: LOADED 018812621 DISK/TAPE 018812621 REQ *** OVL000 >ld 21 PT1000 REQ: prt TYPE: rdb CUST 0 ROUT ACOD TYPE RDB CUST 00 ROUT 0 DES...

I'm not dialling anything else, just a 3-digit extension (724 in the post above). I was told by the vendor that FLEN needed to be 3 because that's the length of the extensions. Rory.

This is what I did to set up 724: LD 87 REQ new CUST 0 FEAT cdp TYPE dsc DSC 724 FLEN 3 DSP dn RRPA RLI 7 NPA NXX DSC Rory.

[newbie alert!] I've set up a new cdp to be passed to a Dialogic Media Gateway, but there seems to be about a four second delay from when I press the last digit until the call hits the gateway. Any idea why the delay is there? Rory.