Recent content by SmallFish1

Thanks - If I don't have access to a printer with the information also appear on my pc screen and I can view from the screen? This is also assuming WinSPM will work. If not, I think I have found enough documentation that I can use the TUI.

I found a copy of WinSPM - so if anyone can provide the steps using WinSPM that would help also.

It's a Magix - would you be able to provide a cheat sheet guide to walk me through the process? I'll be doing through the admin phone. I am replacing the lines on Monday and just realized I missed this step. Thanks.

I am taking out my Centrex lines and need to remove the Centrex access code (9) that is being inserted. Right now the users dial 9 + phone number and the Legend inserts another 9 for the Centrex. When I convert to non-Centrex how do I remove the 9?

Agree with the internet firewall connection since that is outside the Call Manager control but what am I connecting the voice T1 portion of the IP Flex router to? I was thinking it would still go to the existing router which is essentially the PRI card on the phone system.

MrTelecom1 - Sorry for the delayed response. We didn't get it working and left it on PRI. How did yours go? I have installed ipf on avaya, nortel, cisco, panasonic, shoretel and even some thers vut couldn't get it to work on Nec. It was a very olh unsupported software release.

So if I have a cable going into the FE 0/0 and cables going into two T1 DSU/CSU cards what is my configuration? The site has one voice PRI and 2 data T1's. My original thought is 2 data T1's were going into the T1 DSU/CSU cards (partly because the cables going into the ports are the same color...

I have an Avaya Legend system that currently uses Megacom 800 service. I am an 800# newbie so I'm not sure why I need a dedicated T1 but I believe I have one. Does each 800 call take 2 trunks? For a variety of reasons, I am moving to Readyline so that I can eliminate the dedicated T1 right...

If I have to delete digits where would I do that at?

Thanks - you are probably right.

What interface is used to connect a PRI circuit to a Cisco Call Manager? The customer is remote and says it is on a 2811 router. I have seen it installed on a card within the CM. What is the difference?

The more I read, the more I confuse myself. I am coming from Nortel world and to launch system admin I connect my pc to phone system (bcm) via lan cable/port. Is this similiar with WinSPM? As I read through sites it seems I have to connect via my modem port and dial in even if I am onsite? Is...

I am changing services from PRI to IPflex. The IP FLex emulates the PRI configuration as long as the settings in the phone system match the configuration in the router. The only variable that I don't have is how many incoming digits is the Avaya looking for. I think I can find this info out...

Thanks - I downloaded the file and through reaseach I think i can connect to the system when I get on site. The primary reason I need to access the system is to verify how the PRI is configured. The info I need is: NI2 or 5E (I believe it is 5E) ESF (yes or no) B8ZS ( yes or no) # of incoming...

is there a free download for pc-based system admin for older avaya systems like the magix/legend?