Recent content by Signo

I wanted to thank everyone for their input on this matter. Through testing using the input from here we have managed to find the issue preventing the transfers from working as expected. We can successfully warm transfer a call, and the SIP channels clear, the the call stays connected to the...

Thank you intrigrant I will be sure to read the article.

Janni78, I realize the transfer is not truly blind, and was wondering how you do a true blind transfer now I know. Thank you for that info. As far as releasing the call from the PBX this was my goal. Since we are the provider of the SIP trunk we can change settings and we would like to provide...

HI everyone its been a long time since I have posted but I have a question some of you experts might be able to answer. I have been tasked to test a sip trunk to IPO and one thing I have to test is blind transfer. IPO is 10.1.0.3.0 build 2 My steps are make call into IPO sip trunk, answer...

qtelcom, Thanks for this info. I am in the field today but will try the fix from your link. My demo has a v1 combo but I can change that pretty quickly. Will report back with my findings.

Thanks Westi. I am going to report this though IPOSS today. We will see what happens.

I got busy yesterday and was not able to test yesterday. This morning I have downgraded my demo system to 9.1.6 and the echo is gone. So it is related to software build. 9.1.8 and 10.x.x are experiencing echo on analog trunks with IP sets. The older builds that also don't have the park issue...

I am going to downgrade in the next few minutes to test. I will post back with the results.

I know it happens but they did work on previous releases, just trying to see if it is wide spread. I base my parts and install strategy around my past experiences and I only do analog and IP if I have too. It makes me laugh because my 12 year old bcm400 in my office can do IP sets with no issue...

Sorry I didn't include the basic stuff I already tried. The d-marc has no echo, digital sets dont echo, agc has been turned off. Codecs have been changed to g.711Ulaw, it does not matter what codec is used it echos. Thanks

What version? I have been getting this error on a recent v10 system when I try to upload embedded VM language files. Just curios on my part about the system version. Edit: Just tested on 9.1.8 and get the same error as v10. Makes sense since they are in the same build cycle.

System has analog lines (i know, i know) and has echo at the beginning of and incoming call, and randomly through the course of the call. I have also had the echo on outgoing calls during testing although the client did mention it. Client was v10 and my demo is sitting at 9.1.8, so I tried the...

It was left dhcp because the client wanted to static reservation instead of us putting the static in the unit. The real issue was the fact that after 6 months he never put the reservation in the dhcp server. I trusted he would do his job. We have never left a system on dhcp without a static...

I got a call from the customer first thing this morning that the system was not working, I tested before I left last night so I knew that was not true. I figured maybe it lost the groups again since I didnt know about the fix until after I left there yesterday Turns out park was not working. I...

When the hung groups were missing I was looking at SSA and the calls didnt show up at all even though I could see them alerting on the front panel leds. Then I noticed I had a some service alarms, so I looked and it had an alarm that said the system was trying to use a multi site license that...