Recent content by rongill

Thank you.

Thank you.

Hello, Trying to set up CDR for genesis call accounting. CDR is turned on when I prt CDR_DATA from load 21. The CDR is turned off when I print any of the RDB's from LD 21. Does anyone know the exact config I need to get this running? Thanks

i just tried forwarding a number that is on the same PRI and it worked. The branch has a bcm50 which functions as a SRG. All the lines home into the cs1000(where 5787 is located).

same PBX The 6410 number is a DID active at a different location.

even internally when i dial 6410 i get a fast busy

5787 is an active TN. It is my office phone

Here is the programming i have. It still rings twice and gets a fast busy. Does the 6410 need to be programmed into the system? Or does it just have to be active on the PRI DES WENDT TN 096 0 00 03 PHANTOM TYPE 500 CDEN 4D CUST 0 ERL 00000 WRLS NO DN 6410 0 MARP AST NO IAPG 0...

figured it out .. the erl should be ERL 00000 im still get busy signal after 2 rings . but im going to confirm if that number is active on the PRI. To confirm does the number still need to be programmed in the local sites BCM or elsewhere in the CS1000?

this is where i programmed it. seems to be a phantom .. DES WENDT TN 096 0 00 03 PHANTOM TYPE 500 CDEN 4D CUST 0 ERL 00006 WRLS NO DN 6410 0 MARP AST NO IAPG 0 HUNT TGAR 4 LDN NO NCOS 4 SGRP 0 RNPG 0 XLST 0 SCI 0 SCPW CLS CTD DTN FBD XFD WTA THFD FND HTD ONS...

Also if i wanted to go the phantom way (if the did's arent already coming into the system) I get this message during FTR DCFW 4 DN. SCH0355 Unable to match input field with stored mnemonics what am i missing here. I am using my own DN to test

so i have setup my idc table like below. How do I delete if i wanted to ? DCNO 1 IDGT CDGT 5 8 2 0 5 7 8 7 6 4 1 0 5 7 8 7 7 4 1 8 5 7 8 7

we will be only using it for the above scenario. If an internal user wants to get a hold of the sales guy they would call his direct extension.

Here's what we are trying to achieve. We want customers to think the sales guy is local to their city. We have 3 locations with one sales guy. Customers call a local number 306-555-3201 for location A Customers call a local number 204-555-3202 for location B Customers call a local number...

Hello, Looking for forward 3 lines to 1. The 3 lines are active did's but not programmed to a phone. The line 4 did is programmed to a phone. I was thinking creating 3 phantom TN's and forward those to line 4. Am I on the right track?