Recent content by rjhermann

Having a fun time trying to figure this one out. Here's the scenario: We have an 1140e with two add-on modules. We would like to set them up to 'shift' to a second page of buttons. We have read Nortel's cryptic instructions and cannot figure it out. We can get the first addon to do this but...

Disabled terminal services, removed kvm, connected directly and still no go. Have reinstalled tm and still nothing.

Using TM3.2 all patches updated on WIN2k3 SP2. What is happening, is when I go to the telemanagement module, and select the edit menu and choose telephone configuration, it starts to load then comes up blank. The window does not close and must be shut down through task manager. This occures...

We just recieved some 6140 wireless phones. I am curious what model you program it in the 1000e and what settings need to be enabled on the Cisco WLC 4404 for the PTT feature to work. The 1000e has only the 22xx phones in it; I tried to program the 6140 as a 2211, but it reverted it back to...

On your data vlan, you should have option 128 set with the string "VLAN-A:xx" in your DHCP scope settings as 12oz says. Then in your voice VLAN, you should have option 128 set with the string "Nortel-i2004-B...." The "xx" in the data vlan string will be the number you use to designate the...

You can use option 128 for any release. Our phones came with 0625C39 which is very old. Looking at your string above the 'b' is not capitalized; don't know if that could be the problem but I would make it capitalized. Another note, we are migrating from a 1000M to a 1000E system. On the old...

What exactly is the problem?

I know what you are talking about and that is incorrect. Also, with the 3750e, when you setup the vlan in the switch, it should correspond with what the router ip is in your DHCP scope. The router ip should be something in the same subnet of your scope. For instance, if your scope is...

Do not use the "Nortel-i2004-a" string in the data vlan; only the "VLAN-A:30." string and set your phones voice vlan setting to 'DHCP.' Then you will have the "Nortel-i2004-a" in your voice vlan only. The "VLAN-A:30." string tells the phone to switch over to your voice vlan and from there it...

S2 would be for a second call server if you had one and S3 would be for your GXAS server if you had one.

Not exactly sure what the problem is, but three questions: 1) What string option are you using, "Nortel-i2004-A" or "Nortel-i2004-B"? 2) What firmware are the phones? 3) How is your switch configured? I'm assuming with the 3750E you have a data vlan and a voice vlan assignment on each port. On...