Recent content by richa164

Thank you

Hi telpeter ... Then, The Best is to re-install the SE again. ok, if I just connect the LAN1 from the SE and Expansion, Can I use the LAN2 port from SE and WAN port (LAN2) from Expansion to start the ignotiation process again, and connect these ports to the customer switch (already disconnect...

Hello ... its possible to change the IP Address of the IP Office Server Edition Using IPO Server Manager Mode ? The Customer need to change the IP Address of the Network and I Know its not possible to start the ignotiation process. Thanks in Advance

Hello ... Any Suggestion ???!!! Thanks in Advance

Hi ... We have a customer need to make integration from Avaya IP Office 8.1 to Microsoft Lync Cloud. Is this acceptable ? what’s the requirements to accomplish this ? Thanks

Hi smokinjoe, do you mean after start the Impedance, no I dont try this ??? Thanks

Hi All, Is there any configuration either on IPO or on VMPro I can test ??? Thanks in Advance

Hello ... I also try to use Embedded Voicemail (Auto Attendant), the same problem occur . Thanks.

Hi ... Is there any Idea to help me solving this problem ?? Thanks

Hello Telecomboy ... As I tell previous, I test and try all the options on analog trunk, one of it is start Impedence, but the same problem still exists. Also I runing IPO Rls9 and the problem is still. Thanks.

Hello ... I have IPO Rls. 8.1, with VMPro 8.1. I have 4 CO Lines Configured as Loop Start ICLID ( The CLI Type is FSKV32 (deafult) ) I have Configured a Module on VMPro to be answered by ICR. When Calls the Company Numbers, there is a busy tones returns back on all lines. I change many...

Hi ... Thanks, so its a network issue as tlpeter advice. last thing, what should I tell the IT to do to solve this problem ? Thanks and Regards.

Hello Mr. telpeter: Can you tell me more about this ? what should I do to solve this ? Because the IT Engineer tell me that the firewall between two sites is not configured and all ports is open ? Thanks and Best Regards.

Hello ... when ring from extn 104 to 201, the phone show me the name of the person that I want to calling when try to dialling (Reception) but with Unobtanable. Thanks.

Hi derfloh ... when check via SSA, the SCN line on each system is UP and the channels is Idle. Thanks