Thanks a lot to both of you. I ended up setting Auto Hold to On, because the users want to keep seeing the call details from Auto Display Waiting Call, for additional calls.
It would be good to be able to still make Hold visible, even if Auto hold is working, just so people can still explicitly...
A better description of the issue would be: When a second call comes in, the Hold button turns into an Answer button, and there is no apparent way to put the call on hold to answer the 2nd call, and just pressing Answer disconnects the first call.
Ideally, I'm looking for a way to keep the...
I had seen this issue mentioned before, but no real solution, as far as I can tell, only a per-call workaround of having to press the Phone button to return to the on-hook button layout during the call.
Is there no way to program the button layout used during the call?
Tommy,
I'm sorry, it still seems like I must be missing something. If I dial *03 followed by 2723874 the numeric version of the modem password, at least when pressing where letters appear on a phone dial buttons, followed-by 01, or 02, or 11 etc, e.g. *03-2723874-11 then I get a fast busy...
Tommy,
Thanks, but I'm having difficulty getting that to work. If I pick up a handset and dial *03 01 or *03 02, I don't hear anything, compared to when I dial *33, I hear a dial tone. I'm not sure on Magix systems, but should I hear a busy if that line is busy, or should I just hear...
Tommy,
Thanks. Sorry for the delay. I had thought the recording was from the Magix, because the woman's voice sounded like the Merlin Messaging announcer voice, and I had never heard it before.
The sound typically heard if calling out from that site on the (POTS) lines that require a long...
Just to reiterate/clarify, when I set the extensions to ARS Restriction level 2, the they get prompted by the Magix to enter it's auth code, and when I have ARS Restriction set to 3 for that extension, the magix doesn't prompt them, but depending on the line they go out, the phone company...
Tommy,
Here is a recording of the verbal prompt to enter the auth code, after I dial the extension. I dial the extension that is call forwarding but which has ARS Restriction level 2, to only forward out the PRI, and I'm prompted verbally to enter the auth code.
In this case, this is for my...
Tommy,
Thanks for the reply. Yes, want to cause the extensions that are permanently forwarded to external phone numbers, to be routed out the PRI exclusively, yet not prompt the caller to enter the magix auth code.
The forwarding was set up by dialing...
P.S. This is on a Magix v4, with each extension that's being forwarded externally already granted Remote Forward and Trunk to Trunk transfer permission in SPM.
Each of these extensions also has an Magix authorization code which was entered when their forwarding was set up, and which the caller...
Hello,
The short version: We need calls to externally-forwarded extensions to go out through the PRI only, but without the caller being prompted to enter the authorization code of the extension they are dialing. Please help!
We are forwarding a number of extensions to external numbers, and...
Does anyone have an idea why the main auto-attendant would be picking up most but not all DIDs and not letting me get in through the DID I have set to go to Remote Access?
Alternately, is there any other way, through WinSPM or Standard SPM to change / update the number that an extension is...
crvbob: Thanks. I'm not at the site, and at this point, can't use feature codes. I had only mentioned *33 because at that point I wasn't connected to the system, and I didn't recall seeing the Inside/Outside option for Auto Dial in WinSPM telephone programming, and thought he meant to put in a...
Sorry for being unclear. I already have remote access via remote desktop to a computer attached to the system's Admin port, running WinSPM, and also access via modem.
What I need is the ability to dial through the system, specifically to modify call forwarding for extensions of salespeople who...
Hello,
I attempted to set up remote access according to a previous post here, but even though I received no errors, when I dial the DID number I set to be for Remote Access, it just plays the main voice menu.
I'm using the same incoming call routing that's working for a 2nd DID on the same...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.