Recent content by rain78

if they are both 500 sets im guessing its as easy as re-jumpering I bet its double punched with the conference room T.N.

Dont think you can out a channel without disabling the loop and associated dchannel first.

Bignose yes this is what it is. ENTRY 2 HNTN 630 ESA_HLCL ESA_INHN YES ESA_APDN NO HLCL 382 DIDN YES HLOC LSC CLASS_FMT DN

Here is what it shows on locrpt => locrpt dn 3721 ____________________________________________________________________________________________________________________________ | | Prime | | | | | | | Location...

Bignose I changed the ECL to 0 and it didn't make a difference still showing the DID when I dial 911.

ok i will give that a try thanks!

I have nothing set in the ECL are you saying I should set it to 0? I have akready removed the ESA entries in the CLID.

Thanks bignose yeah i watched those videos already a few times and I dont have an ECL value set or ESA values and no Dynamic ELINS configured so it should be using the ERLs like i want however its showing its own DID when dialing 911.

I changed my dial plan from 4 to 7digits but did so utilizing HLOC's and the NRS. It made for a much more easy transition and it kept the local sites 4 digits which made it easier for the end users. so for example my CS1000M has extensions 2xxx-3xxx and has an nxx of 228 so to reach that site...

Anyone?

Sounds like its already enabled do a stat CC 0 in ld 60

I have to agree with allenmac you should have ND2 in RCAP.

I may be wrong but i dont think you can use regular Nortel SIP access ports to connect to a Cisco system. I am interested if this does work because I would like to implement also.

Can you post a print out of your DCH and a set please thanks

Did this just start happening? do you have CLS TDD programmed on all sets?