Recent content by quazimotto

EMJP, I appreciate the comeback and information. Can you point me to the information on how to program the antenna and sync a phone to it, please? Thanks again. Quaz

Greetings All, I have a KX-TDE 200 that I would like to set-up a DECT Cell Station with a KX-T7685 handset. I used an unused DLC-16. On the amphenol, I skipped the first pair ( white/blue), used the second and third pairs ( orange/whites--green/whites ) and used a four conductor satin cord to...

Any version of IPO Manager from 6.1 to 11 should get you in with the correct username and password.

Good Stuff, Kizo! Thanks.

Mike_K, Good idea. Thank you. I will post results.

Mike_K, I changed faststart=yes h245tunneling=no. No effect. Same deal. Asterisk-4 makes two-way audio calls to and from the NCP ; Asterisk-5 not so much; I can not get to the NCP. Asterisk-5 to the NCP gives me an "All circuits Busy message". I get two-way audio from the NCP to...

Mike_K, I'll give it a shot and let you know how I made out. Thank you. Quaz

All is working, Mike. I hacked my way through this and have the TDE/NCP boxes talking to everything via H323. I have no Sip licenses. I am having a problem with Asterisk (Issabel_5). I get one way audio when I dial from the Asterisk_5 to the NCP500 and two-way audio when dialing from the...

Guys, Thank you for the comeback. I just saw this. I have connected the TDE systems to each other, to a Cisco CUCM6, to an Avaya IP Office, to Asterisk ( Issabel_4 ) , FreePBX ( another Asterisk Box )and an NEC SV8100 via H323. Works great. I get audio both ways. Using Version_5 of...

Any luck finding the article?

Greetings All, I have 2 KX-TDE PBXS. One is a 200; the other a 600. I would like to setup an IP (H323) line between the PBXs. There's all kinds of information online to setup a Sip line, but nothing on the IP line setup. All help is much appreciated. Thanks, Quaz

I had the wrong type. I thought 600. Nope, 200. I got in

EMJP, I have a KX-TDE600 that keeps telling me I have the wrong PBX_Type or password is incorrect. I cannot get access to the box. Is this a an application issue? Do i need a newer UPCMC app? Thanks, Quaz

EMJP, Thank you for the solution. I appreciate your time. Quaz