Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by OzzieGeorge

  1. OzzieGeorge

    SL 2100 sip trunk problem

    Again in system 2, both systems are set to the same IP!
  2. OzzieGeorge

    SL 2100 sip trunk problem

    Well the first issue I see is that they both have the same IP address!
  3. OzzieGeorge

    SL 2100 sip trunk problem

    Hang on here, the OP hasn't said there are Sip trunk connections between the two systems or any other connection for that matter (other than ethernet). Why is the OP just assuming the two systems can route between each other just because of an ethernet connection? How are the two systems...
  4. OzzieGeorge

    Set date and time on SV9100

    Sorry but I was employed by NEC and the only way we were told to replace a phone was to use 90-23!
  5. OzzieGeorge

    SV9300 - Call Forwarding-All Calls

    Have you checked E604? Split call forwarding.
  6. OzzieGeorge

    SV9300 - Call Forwarding-All Calls

    is 1202 the same for this extension as the others?
  7. OzzieGeorge

    Can NEC DT900 Work with 3CX, FreePBX, or Other SIP-Based PBX?

    Just a note to all those posting an email address. For safety and privacy reasons, please edit your email address out of your post as soon as you receive the link.
  8. OzzieGeorge

    SV9300 - Call Forwarding-All Calls

    Ok so Cmd 1204 being different means we are talking about a different tenant and the settings for multiple things can be different on a tenant by tenant basis. A quick check would be to change 1204 for this extension to the same as a working one and see if it then works. Note depending on the...
  9. OzzieGeorge

    Call forwarding NEC8300

    This can also be set as a key on Dterms and the advantage to this is that you can see when it is active. If your phone does not have these keys set (there are different options so you can for example have a key for call forward all and a key for call forward busy etc) you need to assign them in...
  10. OzzieGeorge

    DESkcON sn716

    Simple answer is No. Operator consoles can't be in a ring group.
  11. OzzieGeorge

    SV8300 to SV9100 System Interconnection.

    We seem to have lost the OP.
  12. OzzieGeorge

    Auto attendant removal

    Just send the call where you want it to go instead of to the auto attendant! Same for all systems!
  13. OzzieGeorge

    SV8300 to SV9100 System Interconnection.

    Your biggest issue is how many calls are you expecting at one time between the two systems? How many extensions and trunks do you have on the 8300? Oh and analogue trunks are not the way to go with this!
  14. OzzieGeorge

    Nec 9100 4 Different Extensions Ringing Same Time?

    I've never come across that before, I will have to investigate further. Its not surprising really as I worked for NEC and we never touched the smaller systems, they were left to distributors I worked on IPS and up. It's only the last maybe 10 years I've been doing SV and SL and there is a lot I...
  15. OzzieGeorge

    Nec 9100 4 Different Extensions Ringing Same Time?

    Sorry, not understanding this, how do you have the extension numbers on virtuals and on the physical extensions at the same time?

Part and Inventory Search

Back
Top