Recent content by Nublin

When you press the transfer button than BM12 bridge appearance it does not transfer. I have not setup one touch transfers but that would be even better.

We are having some strange problems with our 9408 and BM12 expansion module. 1. When bridge appearances are programmed on the button module our operator (9408 w/BM12) is joining in on conversations when she picks up the telephone not pressing the bridge appearance button. 2. Is there anyway...

That would be FNA if I'm not mistaken but if I stick with ICF is there a way to enter two seperate DNs for it to foward to?

Is there a way to make it so that it will forward from the rear extensions after 3 rings to the front?

Is secretarial filtering a specific feature with the 2616 set?

I have a CS 1000E with Meridian 2006, 2008, 2008 HF, 2008 HF w/ display, and M2616 telephones. There is a department here that wants to take all the telephone calls going to 5 telephones in the back(either 2006 or 2008 variants) and have it ring on two m2616 consoles in the front when they...

I have several users who want their telephone to ring and after 3-4 rings forawd to another extension. I was planning on doing this with FNA (have not used FNA before) but if i do this where will the voicemail be left if no one picks up at the telephone that is forwarded to? Thanks

Cheers

So would that also work if the first telephone is busy? That is the real problem, I should have mentioned above. One of the users receives a high volume of calls and the other helps when she is on the telephone. >ld 21 PT1000 REQ: prt TYPE: rdr TYPE RDR_DATA CUST 0 TYPE RDR_DATA CUST 00 OPT...

Hello, I have a couple of users that want to have the forwarding of voicemail delayed by a couple of rings so that the other person has an option to pick up the line. I was just wondering what the best way to do that is? They did mention that the telephones used to have this feature with and...

I just changed the MARP setting and that did the trick, thanks.

----- This is one of TNs I am having a problem with ----- REQ: prt TYPE: tnb TN 004 0 02 14 DES 2008HF TN 004 0 02 14 VIRTUAL TYPE 2008 CDEN 8D CTYP XDLC CUST 0 ERL 0 FDN 3690 TGAR 1 LDN NO NCOS 4 SGRP 0 RNPG 610 SCI 0 SSU LNRS 16 XLST SCPW CLS CTD FBD WTA LPR PUA MTD...

I have a couple of telephones out of about 200 that are not forwarding to their voicemail when someone internally dials their DN while the telephone is busy. I have checked the number for voicemail and it looks like it checks out and should work... However I am missing something, anyone have...

...We hit our limit. Thanks all for the help.

It ended up being a license issue.