Recent content by ndfellow

I have IP phones deployed in homes and remote office off a BCM 50. If you understand subnetting and the correct way to setup the S1 and port your good to go. Same concept as the i2050. I also would not recommend running IP phones over the internet without VPN. Too much of a security risk and...

What has everyone's experiences been with the secure routers, any of them. We have a customer that the routers work about the same as the ARN's they had in place before, however when they turn any of the firewall rules or VPN on, the box completely pukes. Its been our experience that...

there is a special release from Nortel for Notes 7.0

That won't work because I have 2 sites, 15 phones at each site.

Question for the 50/200/400 systems, it don't matter. Senario, I have 2 offices in different cities and have a receptionist at each. Is there a way that I can answer a ringing phone from Site A, that is located at site B? What I mean is Debbie is the recept at location A and Pam is at...

Does anyone have any documented material of BCM's competing with Toshiba?

so take a handset and set it up to ring but call forward it across the VOIP. Understand that part, but where do I forward it to in terms of someone not answering? If I forward it and nobody answers it never gets to the AA.

I can transfer fine if someone answers, however I don't have a receptionist at the remote location so I would like the physical lines (061-064) to ring over the VOIP trunk to my main site and if not answered hit the AA. Possible?

We have 2 BCM50 units with VOIP trunks between our 2 locations for calling desk to desk which works good. Since each system has there own physical incoming lines (2 FXO) into each we would like to have a central physical person answering calls during the day. Does anyone know how I can take a...

I know on the 200 and 400 3.6 and below you can import files or create more than the standard 4 ringtones. Is this possible on the BCM 50 1.X or will it be with the release of 2.0?

On behalf of Dave T (who is unable to get logged into Tek Tips) here is a responce. my suggestion for 4allcom is to unjack the 2 redundant power supplies (with power off) - jack them in again and turn on power, If my BCM1000 with redundant power is any indication it will then then power up, I...

I apologize, here is some more information. Each site has there own AA, own mailbox's and own incoming lines. There is no DID in the picture at all. The 2 sites are connected together with 4 VOIP trunks running over a VPN. We do have 4 diget dialing working from any DN to any DN. Thanks for...

CDP??? Also, we have check the "enable network tranfers", and got the MCDN/Private Networking software (however there is nothing to configure). We don't want the auto attendant to say any extension but if you put in a 4XXX extension, it transfers it to the local DN, if you put in 3XXX, I would...

biv343 - Do you know how to do this work around? Contact me directly if you do please. justin@highpointnetworks.com

both sites are relitivly small. 8 phones on one and 15 on the other. If you know a work around, please please share.