Recent content by matthijsNL

Does somebody have a manual where i can find how to setup and use the Netflow software?

Ok thank you. I will let you know if the software works,

I woul like to measure the bandwidth usage for a server to a switch. What software can i use to measure, for example during a period of 3 days, constantly?

where can i find this "statistics tab"?

Hello, I would like to measure the "bandwidth usage" to a particular Windows server, to see if the bandwidth between switch and server is enough. I think this is possible with Sniffer Pro? I know how to set up a Sniffer Pro measurement, but don't know where i can find bandwidth statistics...

I've a problem using Netscreen NS5XP and the GRE-protocol. Will this firwall default forward GRE?

I've a NS5XP but PPTP pass-through doesn't work? On my server on the LAN IP 192.168.20.1 is see TCP-port 1723 is opened. But on the other side off the NS5XP IP 10.0.0.150 i don't see TCP-port 1723 is opened? Doesthe NS5XP support PPTP pass-through from trusted to utrusted? How do i get this...

I would like to connect a server with 2 1Gb NIC's to a Cisco Catlyst switch? What configuration command's i've to made on the switch?

I'am a new user of a Netscreen firewall. I've a good knowledge of Cisco PIX and Nokia Checkpoint. I would like to map an inside TCP-port 192.168.20.1/RDP to a public address? What is the easiest way to do this?

I have on several interface's 33% of broadcast's. Can this be my problem of having sometimes echo's?

Ok thanx! I will try the newest version. There is a newe version July 2006! On several 3COM-switch port's (end-user) I see 33% of broadcast's can this be a problem?

Thanx for information. I use OS release 5.16. Are there known bug's?

Thank you. I've already read about it at: http://www.protocols.com/papers/voip2.htm But with a ping-tool for my IP-phone to the VOIP-gateway i can determine aproximately the round-trip delay? -ping <ip_number_voip_gateway> -size of voip packet 150 bytes -If i know the average duration...

Hallo everybody, I would like to measure the "roundtrip delay" to my 3COM NBX VOIP gateway. Can i use the ping command for round trip measurement? What packet size must I use to simulate a VOIP packet? Kind regards Matthijs

Is this possible? I've IP-phones with echo and jitter.