Search results for query: *

Does somebody have a manual where i can find how to setup and use the Netflow software?

Ok thank you. I will let you know if the software works,

I woul like to measure the bandwidth usage for a server to a switch. What software can i use to measure, for example during a period of 3 days, constantly?

where can i find this "statistics tab"?

Hello, I would like to measure the "bandwidth usage" to a particular Windows server, to see if the bandwidth between switch and server is enough. I think this is possible with Sniffer Pro? I know how to set up a Sniffer Pro measurement, but don't know where i can find bandwidth statistics...

I've a problem using Netscreen NS5XP and the GRE-protocol. Will this firwall default forward GRE?

I've a NS5XP but PPTP pass-through doesn't work? On my server on the LAN IP 192.168.20.1 is see TCP-port 1723 is opened. But on the other side off the NS5XP IP 10.0.0.150 i don't see TCP-port 1723 is opened? Doesthe NS5XP support PPTP pass-through from trusted to utrusted? How do i get this...

I would like to connect a server with 2 1Gb NIC's to a Cisco Catlyst switch? What configuration command's i've to made on the switch?

I'am a new user of a Netscreen firewall. I've a good knowledge of Cisco PIX and Nokia Checkpoint. I would like to map an inside TCP-port 192.168.20.1/RDP to a public address? What is the easiest way to do this?

I have on several interface's 33% of broadcast's. Can this be my problem of having sometimes echo's?

Ok thanx! I will try the newest version. There is a newe version July 2006! On several 3COM-switch port's (end-user) I see 33% of broadcast's can this be a problem?

Thanx for information. I use OS release 5.16. Are there known bug's?

Thank you. I've already read about it at: http://www.protocols.com/papers/voip2.htm But with a ping-tool for my IP-phone to the VOIP-gateway i can determine aproximately the round-trip delay? -ping <ip_number_voip_gateway> -size of voip packet 150 bytes -If i know the average duration...

Hallo everybody, I would like to measure the "roundtrip delay" to my 3COM NBX VOIP gateway. Can i use the ping command for round trip measurement? What packet size must I use to simulate a VOIP packet? Kind regards Matthijs

Is this possible? I've IP-phones with echo and jitter.

I've to configure a 3COM NBX100 for analog fax? The NBX100 has a analog voice card (4 port's). I've made a physical connection between the fax en the 3COM NBX100. With my webbrowser i can config the NBX and there is also an option available through console. Dial in/out work's fine with the...

Hello everybody, I've 4 3COM3812 switches. Q1. Is it possible to use this switch for VOIP? Q2. I've to create a Voice VLAN and QoS for voice? Is this difficult for this type of switch? I've a lot of Cisco experience but not much of 3COM Can somebody help me? Kind regards Matthijs

Hello both, I works fine. The only thng I've to change is in the access-list "any": ! access-list outside_in permit tcp any any eq smtp access-list outside_in permit tcp any any eq http ! Thank you both very much.

Ok thank you both. I will try as soon as possible (tommorow) and i will let know you if it works. Kind regards MAtthijs

Hello can somebody help me? I've a Cisco PIX firewall (OS 7.0(4): 1. one public address 209.165.202.130 2. inside network 10.100.1.x/24 3 I use NAT/PAT I've a webserver at 10.100.1.1 and a smtpserver at 10.100.1.50. From the internet I would like to connect to the single address...