Thanks TTT. I finally found the "button" in WinSPM to drop alarms in the literature. Someone else called the teleco before I could do my troubleshooting; teleco is exp. an outage in this area. Thanks
Error I am encountering is PRI D-CHNL INOPERATIVE looking at WINSPM, otherwise I can not see anything wrong with my card. Suggestions aside of calling the teleco?
Can someone please tell me procedure to clear an alarm on my 100dcd module? I am in WINSPM at the moment, I am red on my module and my PRI/T-1 is completely INOP.. no ability to dial out.
Thanks in advance.
Chris
Jim,
The teleco has provided me a list of number for my DID ranging from xxx-yyy-8200 thru -8259. I'd like to -8223 for my fax line since this number doubles as x7123 internally. I am unsure what you mean by "3 or 4 digit feeds" or did I answer your question in my previous sentence?
I have...
Another question, I may have asked this already but would like someone to validate my thought:
If I patch the fax line over to a vacant port on my 016 T/R module (assigning it an extension number from there).. can I program/route/direct my DID number use that port for all in/outgoing faxes? or...
// merlinman, can you please tell me how you know to a TDL vs. a single line port? I am still trying to learn / decipher this report / learn the switch.
// syquest ...
If I want to use the DID xxx-xxx-8223 as the commerical number for my fax (also a number from my batch of numbers with the...
All, I have read through lots of threads here and still can't seem to come to a fix.. can you help?
I am trying to setup a fax machine by plugging the line into a vacant voice port (x7123). I've removed the extension from a coverage group (since when I dialed that ext, it went straight to...
If someone dials into our main line, xxx-1234 the auto attendant spouts out the pre-recorded message during which the caller can 1) dial an extension, 2) press 0 for the OPR (x1000) or 3) simply wait and it will transfer to the OPR (x1000)
During the day, the person sitting up front transfers...
LEt me make sure I understand. When we stood up our PRI, I has my three incoming lines xxx-1234, 2345 and 3456 added to the PRI. I also have a batch of 60 numbers that came with my PRI. When I ring down my xxx-1234, it rings the main console phone where the caller has the option to dial an...
TTT,
Thanks for the input. Let me make sure I understand everything. For us, I presently do not use the night service feature so I'd need to program / activiate it in my switch? Instead of it being actual "night service" I'd be using the functionality, at the press of a programmed button on...
I am a new switch operator / pbx programmer and I havea problem. I have a Avaya (Merlin) Magix as my PBX. I presently have my operator assigned as extension 1000. During the day, if this person moves around they generally transfer the operators calls to another person in the building. This...
Is there a way to allow certain extension to only have the ability to dial 2 pre-determined extensions? I have several phones that are presently configured to dial the operator once they are off hook. Although I am interested in removing that feature and returning them to 'normal operation'...
All, I am still new at watching over my Magix and I am trying to figure out how I can dial from an outside line (i.e. cell, home, etc) into my main number and then access individual voice mail boxes. Can someone shed some light, or do I need to pull a report and see what settings are already...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.