Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by lleeNC

  1. lleeNC

    Upgraded Server to 12.1 but can't upgrade V2s

    Windows firewall is and has been disabled, still got the same issue. Not sure when we will be upgrading another customer to R12 but I will see if I can replicate the issue then.
  2. lleeNC

    Upgraded Server to 12.1 but can't upgrade V2s

    Yep, I checked all of that. Same issue. We just went with the SD card upgrade route.
  3. lleeNC

    Upgraded Server to 12.1 but can't upgrade V2s

    Tried but failed. Reset security settings on the V2s but that made no difference. We are going to just SD upgrade both V2s.
  4. lleeNC

    Upgraded Server to 12.1 but can't upgrade V2s

    I've tried upgrade through upgrade wizard. Fails. I've tried resetting security settings and it's the same deal. We are going to SD upgrade on Monday. Also getting this error when trying to sync database, Wonder if these issues are 12.1 specific....
  5. lleeNC

    Upgraded Server to 12.1 but can't upgrade V2s

    Decided finally upgrade our Lab Primary server to 12.1 by moving it from an Avaya-provided server to our VMware environment. An issue I ran into was I couldn't upload the VMPRO backup (otherbackups folder). I can select it in 7071 and press "ok" but it does nothing. I had to manually upload...
  6. lleeNC

    Avaya vantage sip login failure when ever the phone restarts

    Unplug the Avaya Vantage phone, walk over to the nearest window, toss the phone out. Get into your vehicle and run over the Avaya Vantage phone several times, and then toss it in the trash.
  7. lleeNC

    9608 G will not clear

    Can you get to 46xxsettings.txt on the same network that the phone is on? Also this might be a compatibility issue with the firmware and the IPO (9.0 is really old). If I recollect, there were several posts about 9608s failing to come up on 9.x with the 9608s being on a newer firmware.
  8. lleeNC

    IPO 12.0 Upgrade fails on Dell 630 servers

    I hate Avaya. We are planning on moving it to VMware, where RHEL 9 is supported along with R12.
  9. lleeNC

    IPO 12.0 Upgrade fails on Dell 630 servers

    I don't think the R630 is supported, per Avaya. It does not have RHEL 9. Let me know if you do get it to work but we already spoke with Avaya and that's what they said. Only the R240 and R640 are supported or any other servers that has RHEL 9
  10. lleeNC

    IPO R12 on HP Proliant Avaya Server Issues

    Where are you seeing this? Also when you said "R210 o R620" are you saying that R230 Dell does not support Rocky Linux?
  11. lleeNC

    IPO R12 on HP Proliant Avaya Server Issues

    Yep. 256GB baby! I've used this drive for other upgrades to 11.1 multiple times. Rufus wipes the drive during creation so nothing else other than R12 on it. Spoke with Avaya and asked, did you guys test this on a HP Proliant server (avaya-provided) and they said "don't know... no"
  12. lleeNC

    IPO R12 on HP Proliant Avaya Server Issues

    Has anyone upgraded their HP Proliant (Avaya-provided) server from R11.1.3.1 to R12 yet? The log is showing a bunch of errors with some of files and then it just ends in "Pane is dead" at the bottom, which does nothing. It's like it can't read or pull some of the files. I used Rufus 4.6...
  13. lleeNC

    TekTips site redesign?

    Is there a dark mode on here? Or do I need to install an extension to force it?
  14. lleeNC

    TekTips site redesign?

    Nonstop alerts lol. Had to manually configure them, hopefully it is good now.
  15. lleeNC

    Avaya IP Office Web Manager

    Have you tried using "Administrator" without quotes as the password?

Part and Inventory Search

Back
Top