Recent content by leburg

Thanks Ed! Do you know what it points to when a port address as an additional 4 digits, such as for instance... 192.168.0.210:1234 Specifically, it's an instruction where inside Windows Media Player open a url...the ip address above. Wish to understand it... Many thanks in advance. Charlie

When a pc is plugged into a network port is unplugged and a different pc is plugged in that port will it take on the ip address of the previously plugged in pc? Iow, does the port provide the ip address?

Bare with me. I took over the task of cameraman for my community. I video board of director meetings for 3 things, stream live over local cable channel, stream live via ustream, record and schedule for later viewing on local cable channel and youtube for on-demand viewing. Lots of pressure at...

Thanks for the input. I tried different cables. They worked with other devices. Don't have access to a tester. Same cable works in the one building but not the other(?)...

I'm a cameraman. Hook up 2 network cams, 2 pcs to a 2960 Cisco si switch, then the switch goes to a port on the wall. I video HOA board functions for my community, stream them live to net and community cable channel, and record for upload to website. Ok. Sorry. Thing is, for the 2 years...

Got around this...thanks for looking in.

Crystal 8.5 Using a subreport to obtain a value that is placed in a shared variable with the main report. I cannot accumulate that field? Any ideas? TIA

Crystal 8.5 I'm attempting to run a subreport on detail a line passing it data from the current record. The shared number var that results from the subreport, I hoped to use to suppress or not detail line b. What I found is that the shared var isn't shared until the next record is...

I'm attempting to run a subreport on detail a line passing it data from the current record. The shared number var that results from the subreport, I hoped to use to suppress or not detail line b. What I found is that the shared var isn't shared until the next record is processed...it shows up...

Thank you LB for your input, it is most appreciated. You the man. I came up with a very similar method once my brain kicked into gear... (if {?custnum} = "all" then {Customer.customer} <> {?custnum} else {Customer.customer} = {?custnum})

I have a table of string data, well, they are actually numbers like 105 106 107... however they are stored as strings. I wish to create a parameter to allow specified selections and also provide an 'all' option. If all is picked the report runs on all of the entries in the table, 105 106...

Using cr8.5, I believe I understand how to use lastfullmonth, however is there a way to use it if the report is say, run in July with June dates (1-30) and in such a scenario pull the last month as if you ran the report in June which would be the month of by May? In other words, inform...

I figured it out. Thank you for pointing me in the right direction!

Excuse my ignorance, how/where can you do that?

I have a report that requires landscape formatting, however my client wishes to have a front page that will serve as the mailing address and needs to be in portrait format to enable them to fold it properly for insertion into a standard legal envelope with a form window. From my experience...