Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by kxt308

  1. kxt308

    SCN Issue

    They are 1408. The phones only ring if directly rung from the other site and voice is ok. The fault is when the hunt group at the main site has calls the 2nd site does not get any calls. Routers have a site to site vpn configured and firewall is disabled for this vpn.
  2. kxt308

    SCN Issue

    I have 2 systems both running 11.0.4 with 6 channels on each. The main system has the calls (via SIP) which ring users within a group. I have 5 users from the second site within that group who can log in/out. Every now and then the users on the second site cannot receive calls from the main...
  3. kxt308

    Application Server Access Recordings

    I have configured a user to access the recordings on the Application Server. When I log into the self-administration page and try to log on using the new credentials I get "Server not responding. It may not have fully started yet. The server has been up for over 20 hours, I can log into all...
  4. kxt308

    BLF on 3rd party SIP Phones

    Either trial and error or maybe start a thread 😁 I retraced my steps. I had created 2 profiles both called Avaya. When I looked at the BLF entry on the 3275 I realized I had selected the wrong profile. Once I did that it started to work
  5. kxt308

    BLF on 3rd party SIP Phones

    Never mind, I've sorted it out
  6. kxt308

    BLF on 3rd party SIP Phones

    Has anybody got BLF's working on 3rd Party SIP Phones, if so how. I'm running v9.1.12.0 and 2 Grandstream handsets GXP1625 and GXV3275.
  7. kxt308

    Inbound CLI not showing in call recorder

    Has anybody had an issue with the Avaya Call Recorder not showing the CLI info when viewing it in the selfadmin/Recordings area but is does show on the receiving extension. https://files.engineering.com/getfile.aspx?folder=84fba19f-a019-4fd5-ad18-8d6e8d9fe6ce&file=Inbound_Call.jpg
  8. kxt308

    Avaya Call Recording/Application Server

    Thanks for the reply's I did use the Avaya USB creator tool and Rufus but still no luck. I used the abe-11.0.100-8_el6.iso to create the bootable USB. Is this correct or do I need something else.
  9. kxt308

    Avaya Call Recording/Application Server

    I have a site that will be using the R10 Media Manager. I installed VM Pro on a new machine only to later find I cannot access the recordings through the users login through the IPO. I believe that I need to install the Application Server so that users can access recordings, i've created a USB...
  10. kxt308

    Phantom Extensions

    Sorry it wasn't LD 95 it was LD 20 I get this error when making changes to a virtual extension SCH1944 Virtual and Host Terminals are not allowed to be changed (CHG), removed (OUT), copied (CPY) or moved (MOV) when the VO Worker is logged in (Overlay 11). The users hotdesk and I would like to...
  11. kxt308

    Phantom Extensions

    Is it possible (and if so how) to log out a user from their phone through the console, as I cannot make changes through LD 95 without the phone being logged out.
  12. kxt308

    Default Start Points

    On the leave mail and collect mail I have to remove the link save it relink and save again. Otherwise when retrieving mail you have to enter the mailbox number and password.
  13. kxt308

    Default Start Points

    I think that this may be a common fault but every now & then I need to reset the default collect and leave in VM Pro. I have upgraded the software but it still happens. Has anyone else have this issue and if so is there a fix?
  14. kxt308

    OS7200 LCP

    Has anybody managed to recover a LCP card after an upgrade to 4.33 failed. I have the recovery procedure for the LCP card but i'm having issues trying to recover the card. Using Hyperterminal I send the DPSME.H file as 'Send Text file' but I don't get the LCP flashing rapidly. I did wait the...
  15. kxt308

    Outbound CLI

    You have a keen eye. I copied a wrong entry, it is currently set to 5

Part and Inventory Search

Back
Top