Recent content by keke6608

It is working finally. Service provider changed server adress.

Goto line > SIP Line > Use Network Topology Info; put it on "None" then it will use the IP route as the gateway address." I've tried. still not working

I try X-lite with the same sip account and It is working. Can that prove it is nothing wrong with router/firewall?

I do tick the Rx. Like kholladay said: Something isn't getting through. I will ask our IT guy reboot the firewall.

Thanks everyone for your advice. I understand what MattKnight is saying - the registry addition will only fix the symtom... is there a way of sorting out the BOOTP issue then with IPO? I'll get the registry changed on the Server soon enough :) Thanks very much for the help, much appreciated!

Yes, we're running Server 2003, thanks for your advice Jamie. The System Event Log shows that the DHCP service was stopped. I tried restarting the service but stopped straight away saying that another Server was on the network, pointing to the PC that has IPO installed on it. So, is there a...

our comany server not working properly after I upgrade the IPO. other computer cannot get IP address. It is told another server stop the dhcp search. that ip address is the compuer with avaya manger.

to Bas1234: I haven't reboot the firewall. I have to ask IT to do that. to kholladay: we just use sip trunk for outgoing call. It doesn't have a DID number. Here's the sip trace 56818194mS Sip: SIP Line (18): Option timer expired 56831383mS SIP Tx: UDP 192.168.0.105:5060 ->...

????? does not tell me anything about sip trunk. It is really ??

4263855mS PRN: 241: Digit Pressed 0 4263855mS CMCallEvt: 0.1041.0 -1 BaseEP: NEW CMEndpoint f5648dd8 TOTAL NOW=1 CALL_LIST=0 4263856mS CMCallEvt: 0.1041.0 -1 Andrew Office.-1: NEW CMExtnEndpoint f5648dd8, Name=Andrew Office, Extn=241, Phys Extn=241 4263856mS CMCallEvt: CREATE...

my SIP trunk stop working after upgrade to R5. Anybody has same problem?

my client's old system is NEC keyphone. They get use to different ring tone for different bussiness.

tlpeter, read the bloody instruction.

I didn't say Avaya can have a Qsig link to a non Qsig compatible pabx.

I know how to do this in AVAYA Difinity. It works as ISDN TIE trunk. But in NEC different PRT trunk type up to fime ware or program only?