Recent content by kcbs76

Thank you Martin. I have not tried this out yet... But nice to see a response to one of my posts. I am going to redo the whole configuration with your recomendations and come back to you if success or failure. Thanks again!!!

Also is there anything to be configured on the Cisco VPN Client?? I have enable where it says "Allow Local Lan Access

I hope this post will not go answered too. I have finally setup IPSec tunnel for vpn clients. My problems is that they get disconnected from the LAN and can't access the internet or any local site. I have read many post that I need to enable split-tunneling. I have created the following two...

I am getting the following error. Please any help. I have no idea what to do. I have edited the registry to disable to defualt ipsec plicy with MS. Tried with Cisco VPN client. I really don't know where to go from here. Please any .... any help. ISAKMP: phase 2 packet is a duplicate of a...

I am able to connect to the Pix with a windows 2000 client but not with XP. I am also trying to confiure a IPSec connection but keep getting errors. ISAKMP: phase 2 packet is a duplicate of a previous packet. Please any help on pptp and ipsec configurations will be appreciated.

I am trying to configure PPTP on my Cisco PIX and cant seem to figure out what is wrong. I have wiped out the whole configuration and used the PDM to setup a initial site-to-site vpn and vpdn group. But I get the following error over and over. I have turned on debug on vpdn and I get the...

Thanks for the reply. I assume the first option you have stated is a site to site vpan. Do you have any sample configurations for options 2 or 3.

I want to setup the cisco pix as a vpn server for Cisco vpn clients to connect. I don't want to install the Cisco Secure Access Control Server (CSACS). How can I configure the pix to authenticate and manage the vpn users? Is this possible?

Hi Alan, First of thank you very much for the suggestion. Please correct me if I am wrong but I am not using Certificate Authority. I am just using preshared keys. So do I need to RSA Key? I am reading Syngress Book but can't seem to understand some concepts. Also the English is kind of...

Please help me somone :-( This the log from the vpn client when I try to connect Establish secure connection using Ethernet Cisco Systems VPN Client Version 4.6.00.0045 Copyright (C) 1998-2004 Cisco Systems, Inc. All Rights Reserved. Client Type(s): Windows, WinNT Running on: 5.1.2600...

I have configured for Remote clients to connect via Cisco VPN Client with a pre-shared key. But my clients can't connect. I suspect the outside access list is wrong. But I did not create this entry and before I edit it, I want to know if this configuration is correct and how can I let access...

Hi, Can somome explin to me about these routes outside 0.0.0.0 0.0.0.0 888.888.888.73 1 OTHER static outside 888.888.888.72 255.255.255.248 888.888.888.77 1 CONNECT static inside 172.20.0.0 255.255.0.0 172.20.2.3 1 CONNECT static All I did was to asing a ouside IP address 888.888.888.77...

sorry for the stupid question No dhcpd address 192.168.1.2-192.168.1.254 inside. I tried almost everything before i tried that. Anyways how can you disbale everything related to dhcp at once?

I want to disable dhcp for the inside network and point the interface to my existing dhcp server.

I have done the basic configurations to get my pix up and running. I have configured the basic stuff, host, domain, interface ip's etc. How can I setup a basic vpn server? Can I use the term basic here or is it going to make me suffer :-). Any basic setup or documentation how to achieve this...