Recent content by jrogerom

Hi, I have a questio regarding an E3 configured in a router. The following is the Interface configuration. interface Serial1/0 description CONEXION CON E3M-0707-0003 mtu 1500 ip address 201.117.202.205 255.255.255.252 rate-limit input 15000000 24000 24000 conform-action transmit...

Hi, the company that I work for needs to be PCI compliant so we installed an event log analyzer software. So far I can collect all the logs from Win XP, Win 2003 server and cisco switches. I would like to know if I can get the logs from summit X-150-48t switches I have 7 of them. Also, what are...

Hi, I need to be PCI compliant and I need an IDS. I have heard about SNORT but is there any other brand that anybody recommends according of their experience? Thanks in advance for your help.

Hi, We have 6 Summit X-150-48t switches ( 48 10/100 and 2 10/100/1000 ports). I am new at the company and I already gather all the information of the company infrastructure. The tech guys that installed the switches did not configured anything, they just pluged in the computers ports and that´s...

Thanks guys for the info. i already give you stars.

Hi. I have windows 2003 server with doamin controller, 500 computers with win XP. the 500 computers don't have internet access and I want to do the following: 1.- Install updates from win XP to 500 computer. 2.- Install updates to antivirus in the 500 computers. 3.- Install java updates to 500...

Hi. I need to install antivirus on 500 computers. I don´t want the computers to access internet to get the updates, So how can I just download the antivirus updates in one computer and sent those upadtes to all of the computers. Thanks.

unclerico.... Yes I am using a flat network. Well I just have 2 weeks in this new job. The IT guy before me spent 3 years here and he left 7 Cisco switches, 7 Summit Extreme network switches, 1 3com and 1 Linksys. Also no VLANs, we have 500 computers that receive VoIP from USA and access a CRM...

Hi, I have 1 switch Catalyst 3750 and 6 Catalyst 3560. The six catalyst 3560 are cascaded from the cat 3750 using gigabit ports with no configuration. Is it right to cascade to many switches? Can I connect the 6 cat 3560 to the Cat 3750 configuring every port as trunk port? (like a star...

Hi, our network recently has been receiving an attack from an external IP addres. I have a cisco PIX 515E firewall and I want to block that IP. Is there anybody who can help me to configure my firewall? Thanks in advance.

Hi, I have a CISCO IPCC Enterprise. I want to send IPVoice to a remote location. Actually, I have a TSUNAMI 10BASE-T 2XE1 Spread spectrum 5.8 GHz Digital Radio. WESTERN DIGITAL. and with this equipment I send voice and data. I use the RJ-45 port (10 MB)on both Tsunamis TO SEND VOICE. I...

Hi, I have a CISCO IPCC Enterprise. I want to send IPVoice to a remote location. Actually, I have a TSUNAMI 10BASE-T 2XE1 Spread spectrum 5.8 GHz Digital Radio. WESTERN DIGITAL. and with this equipment I send voice and data. I use the RJ-45 port (10 MB)on both Tsunamis TO SEND VOICE. I...

Hi, I have the following controllers in the gateway controller E1 1/1 framing NO-CRC4 clock source internal pri-group timeslots 1-31 service mgcp controller E1 2/0 framing NO-CRC4 clock source internal pri-group timeslots 1-31 service mgcp With those controllers I receive 800 numbers...

Thanks, And Yes we have CM 4.1 and IPCC 6.0 in a mexican callcenter greetings!

Hi, I have a Cisco Callmanader 4.1 and IPCC enterprise 6.0. I have 800 numbers in USA and receive them throgh internet in Mexico. I use to receive the caler ID but now I do not receive it. The Telephone provider asked me to send them packet capture traces for incoming calls, so we review the...