Recent content by jeepguy267

Needed to re IP the IPoffice once at install location, but not until I had already completed the ignition process on the bench off site. I went into providers, deleted old IP and added new IP of IPO. "put" the changes and rebooted server. Waited and hour and still get the FAILED connection to...

There are mixed select/non-select systems in solution" 1. What does "Set all nodes to select" do? 2. How to change a system back from select to regular server edition? Not sure how or why someone managed to set the 500v2 expansion and secondary server to "Select" mode, but they did and now...

IPO500V2 6.1(22) with 2 combo cards and embedded vmail. Direct dial "quit" working off the auto attendant. I have the direct dial allowed check box and the dialbynumber set on the digit 2. Attendant has been working since this was installed (6.1 so a couple years now). Programming appears...

I post too soon. What I show above works. It helps to save changes before testing them.....un-star for me

Server edition 9.4, 9608 sets, trunks are on 500v2 expansion. Default SYSTEM short code 9N/Dial/N/50 gives secondary dial tone just fine. I have user rights configured to point some users to an alternate ARS with different restrictions with a USER short code 9N/Dial/N/51. The 9N in the User...

Moving our secondary server (currently resides in same physical office and subnet as primary server) to a remote branch office. I am thinking I just need to change the eth0 on the secondary server to the new subnet and then remove/add secondary server. I am a little gun shy on it because of...

Robb thanks. The module referenced in that action tab is non existent. Likely an imported that didn't bring everything over. Do you have anything I cam reference to rebuild that piece?

This is an existing setup I am trying to work out 1 specific piece. Meet me works for creating and joining bridges using the 555xxxx format. When calling from outside to create or join a bridge there is an auto attendant where you can enter as participant or moderator. Moderator leg of the...

Thanks all, for furture reference: going from 8.1 to 9.0(sp2) by booting from ISO on a DVD and choosing upgrade during the wizard crashed the box like I have read in other posts. Not sure why I thought mine would go different, but figured it was worth a try. Get a good back up off the the...

thanks amriddle, very helpfull. Of course I am in the process of burning a disk now. And while I wait, why not ask?

Has to be DVD? Does USB work?

Seems like a simple question... but which file do I drop into the "Software Repositories" in the web interface to upgrade the linux box (going from 8.1 to 9sp2). I have the ISO file from the support site. I am thinking I "add" this into the operating system and applications entry then go to...

follow up as promised. IT "did their thing" on the switches and everything came up. No changes to my config

Thank you IPGuru for answering my question. I will post resolution after arm wrestling with IT

both are 105 at both ends, nice to make them match I have other networks I am referencing and I have an entry in the TIE field for one location. Have no idea why I would have changed that. It's been a long time since building that one