Recent content by jbartling

I have a Nortel BCM 400 and use some WLAN 2211 handsets. I have syslog monitoring turned on on the phones. I was looking at the log and was noticing all the phones are returning a "unknown Unistim Cmd 003a from Mgr 0016<000>" message. What does this mean? Is it an error? How can it be...

Actually we just replaced our access points with Linksys WAP-200 AP's. I have SSID broadcast enabled on all AP's. Ill turn my DTIM interval to 3. I have the wireless channels set and power level is at 100% on all AP's. I have 3 AP's in one building and the channels are set to 1, 6, and 11...

WMS software? What is that?

We recently purchased a WLAN 2211 phone. It works great as far as voice quality and funtionality. The problem I am having with it is that it has problems handing of to different AP's while I roam through a building. Any idea why? Would a firmware upgrade help with it?

According to a Nortel document is says the if your AP has WMM the 2245 will use that instead of the SVP protocol. SO we will be using the WMM Qos.

Is this all that is required to make a WLAN 2211 operate? WLAN Handset Any 802.11b/g AP Call Center (BCM 400) 2245 IP Telephony Manager Anything else?

According to Nortels website you can either use the 2245 Telephony Manager or an access point that supports WMM QOS. My AP's support the WMM Qos that the phones can use. When I boot up the phone it says it cant find the SVP Server. Anybody know of a way to get the WLAN 2211 to work without...

When i use the hotline this is what happens. I put External, Use Pool B, and External #8. When i dial the number i get it as dialing 8816218601421 instead of just 816418601421. How is this corrected?

its actually one of our T1 lines

When i set the destination code to 1A i get an error. How do i change the park code. I'm sorry im new to this system. I just want to use line 144 as pool c and then dial out on that line without pressing 8 or anything. Thanks

We bought an ATA2 so we can fax out our BCM using our T1 line. Is there any way we can just dial the number instead of dialing 8 before it. Example: 16214234567 instead of 816214234567? Thanks

Thanks, Does the replacement hard drive have to be the exact same model as the current drives? Or can it be a bigger size, different brand?

WE are thinking about upgrading from 3.7 to 4.0. We have heard some systems crash during the upgrade process. Our BCM is equipped with a mirror drive, my question is can we take out the Mirror Master and replace it with a blank hard drive and make a mirror of the current system? If yes, will it...

addes 8011 under destination codes and used route 001 and changed the absorbed length to 1. thanks for all the help.

Thank you so much for your help. I appreciate everything. Yes, we get much better rates on our T1 for outgoing calls.