Recent content by ISPKing

They are hard limits across the platforms. Not Hardware limited. If you were to hit 50,000 connections on a asa 5510 is will display the message maximum connections hit, and will not accept or create any new connections. CCNP

Nope should juts work, same concept as the ASA5505 in client mode. I have tested them in a 4 layer natted network no issues... CCNP

You can do PBR just change the SDM to routing. Other then that just connect them add two default routes and it will load balance per-flow if you make it the default gateway for your external facing devices. CCNP

Good Job Man, My R&S Written was tough.... I guess we are 20% CCIE combined ;) CCNP

a nice 3560/3750 will do you a solid. CCNP

Maybe is the Flux Capacitor. CCNP

Is the right Filange intact? CCNP

do a sho system mtu to double check what cluebird said. CCNP

Nope you got it right. You need to Add those sub-nets in by redistributing the connected and statics respectively. CCNP

@calidude2: You seem more like a Microsoft guy. They have much easier exams. CCNP

?? i have spent 7k on my lab. I am saying on books 3k. And you are not at ccie level and 3k on books? CCNP

check out iperf. Will do exactly what you need. CCNP

Ipexpert and INE are good stuff but very expensive. I've spent almost 3k on my ccie studies with them CCNP

The asa receives a perfect stealth right out of the box from grc.com-<< but that's irrelevant. The ASA is good device to have no matter what you choose. But you might need to hire someone to set it up. CCNP

Really if it's a business i would not recommend anything less then an ASA5505, but if you don't want to fork out 400$ for awesome security you little linksys should be ok. Just know that there are tons of undocumented vulnerabilities on them. And if any serious sustained traffic starts coming...