Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations biv343 on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by iskilam

  1. iskilam

    delayed dial tone

    if i use an avaya vsu5, will it help to eliminate or reduce the delay on the clan card?
  2. iskilam

    external forwarding...

    i have an ip403....can i forward my calls to an external no. so that when a certain no. xxxxxxxxxx dials my extension no. it will forward to the programmed external no. and when a certain no. yyyyyyyyyy dials my extension no. it shall not forward the call. in short can i filter the incoming...
  3. iskilam

    delayed dial tone

    i have an ip phone connected to a definity via linksys vpn router. my problem is i am having six to eight second delay before hearing the dial tone...pls help me with this one...
  4. iskilam

    sg200- ip403 / vsu5-ip phone 4610

    tks a lot morrack for your faster than sound reply...
  5. iskilam

    sg200- ip403 / vsu5-ip phone 4610

    i have an ip4610 phone to connect remotely to my ip403 via vsu5 on the remote side and sg200 on the ip403 side. is there any job aid that i can use to configure my ip phone and the vpn units? pls help..
  6. iskilam

    my fax

    my fax is connected to a pots extension (on my po 403) and i have to dial 9 everytime i use the fax.is there anyway to eliminete the 9...eg...line auto select in partner/magix...
  7. iskilam

    centralized vmpro

    morrack..my two ipo's will be in different area code...so i will ask my t1 vendor to split the t1(12 did and 12 data). mtvilla..are your ipo's in the same subnet? how does your incoming route look like? and associated shortcodes? tks for your help...
  8. iskilam

    centralized vmpro

    can i split my t1 so that i have 12 voice channels and 12 data channels that i will connect to a router then to ipo lan port? is that posiible?
  9. iskilam

    centralized vmpro

    is centralized vmpro possible using pri circuits that will connect my two ip403's?
  10. iskilam

    number of rings

    thank u for ur reply ipguru...are u referring to the allocated answer interval under the telephony?
  11. iskilam

    number of rings

    i want to change the no. of rings for calls to extensions before forwarding to the vm pro. i just could not find the way how to do it...anybody? right now it is 4 rings..
  12. iskilam

    ipoffice mac address

    i have a new ipo403 with rel 1.3 and i tried to upgrade the unit but lost it and i tried to connect thru the dte port..i did the at and at-x commands but then the ipo responds with ok and i could not see anything more in the tftp log...maybe i dont have the correct mac address in the...
  13. iskilam

    my autoattendant

    in my 403, incoming from analog trunks are directed to a huntgroup then to the member. but when the member is rna i want my aa greeting to answer instead of the huntgroup vm...pls help...
  14. iskilam

    direct vm xfer button on dss4450

    how can create a shortcode for direct vm transfer and assign it to a dss button so that i can use the same button to transfer to a user's mailbox by pressing the button and dialing the extension number? pls help...
  15. iskilam

    Direct to VM x-fer from Remote office - plays external greeting

    how to create a shortcode for direct vm transfer and assgn it to my dss4450 so that i can transfer callers directly to a users mailbox? pls help...

Part and Inventory Search

Back
Top