Recent content by interga

I have a sales engineer quoting a new EX controller to replace the MXE controller they have now. He is saying that we can Backup the MXE and restore on to the new EX controller. Has anyone tried this? Nice if this would work. Thanks

I have a 3300 MXe software load 11.0.2.66 with an 5540 ip console. For the last week every morning at 3:00 it goes into night service. Going through the logs I see it loses contact with the Icp for a brief time goes out of service then contact is reestablished which puts it into night service. I...

On a 3300 MXE V5.0 I want to transfer an analog ext on a no answer to another ext than have the 2nd ext's mailbox get the call if there is no answer on that ext. I have call rerouted 1st alternative going to the 2nd ext which receives the call but it will not go to the 2nd ext's mailbox it just...

You can also make up a phantom PKM on an extension by going Multiline IP sets. Then adding the extensions as DSS keys you should then have it show up BLF list on the 5550

That was it pandabear1 somehow the hunt group was set to ring changed it to stn/set MWI now working. Thanks a star for you.

Both 231 and 232 disable mailboxs match extensions and i'm not able to do a send message.

It's all the IP sets. going back this morning to create an analog extension and see if that one gets the MWI

I have an SX200 V4.0 that is now having issues with the MWI not working. Problem just started customer said nothing has changed. tried emptying the mailbox and added a message, the message is there just no light I check the COS of the IP set and VM everything is in there going by the default in...

We have no software assurance and looking to replace a hard drive that has 4.0 on it. I don't think we can do an upgrade to 4.2 but we can find MSL 9.1.24.0 which has 14.0.1.7 on it in the MAS 2.0 SP1 download . Do you see any issue using the Nupoint on the MAS download and not the standalone...

Hello, I'm looking for the standalone software

I am looking for Nupoint 4.0 software can't seem to find it on MOL

Just finished a upgrade of an Virtual MCD from 6 to 7 now getting an alarm showing faults on the analog board which doesn't exist. We do have a MCD we use as a trunking gateway. Any Ideas?

You need to go into the Mitel 3300 programming. Under System Feature Setting-SIP Device Capabilities for the UC 360 and under the basic tab change Enable Digit Collection in Busy or Alerting State to Yes. Once the LD call is dialed an option to have the dial pad appear is then displayed

I have an Ticket in Mitel to solve this issue I tried the latest software release for the 360 2.1.0.13 still will not allow you to input the codes in. I will update once all the test are completed

I have a UC 360 unit that the users need to add an account code after making a long distance call. When they make the call the keypad goes away and they are unable to add the account code digits when prompted. Is there a way to add a delay to the outgoing call so you can put in the account code...