Recent content by hostingrfx

Hi Guys, we want to backup some data using DFS. we have 1 drive / Share on 1 server which we want to replicate on the same server but on a different drive. is there anyway to automate this ??

Hey Guys, we have a really big issue here and we need some ways of fixing it fast and well. Raid 1 = System Drive Raid 6 = Data So for some reason our data on Raid 6, after installing bigger drives and extending the logical drive, windows 2k3 can not see it b/c its still in Initializing...

Ok im in guys. i found the specific SErial cable. it was that all along. also, i did a backup before doing ANYTHING! more questions to come now since im in

Ok so im in the RAD using a pwd that actually was already set. BUT when using the NRU software and a direct connect says RAD does not respond. I powered down the system and nothing.

Ok going to reset. i confirmed it wont damage anything else. BUT when doing this -Hit HOLD, 2, 1, then RLS (Release) does that mean press hold, 2, 1 all at the same time and then press rls?

Guys thanks for all your input. I got the NRU / RAD Software. will the below steps reset JUST the pwd part of the RAD? ------------------------------------------------- you'll need a 7310 for the function keys) -FEATURE 9 * * -Hit left display key 5 times -Hit center display key 7 times...

Where can i download this? how do i find out the IP address of this? is it the same IP as the Call Pilot?

i have it already. but this is the ONLY way to get a list of each extension and what each ext has a DID??

Ok, i have for years worked on my own systems. I just got hired at a new place, and to get a tech to come out from AT&T and update the list, etc takes FOREVER!!! not to mention tons of money. I have admin Avaya as well as Astrix now i need to know how to get into this system. here is a list...

your right. but i cant take off something thats already working on one end. =\ im getting this error so far Source Port: RDP Information: encryption failure: Clear text packet should be encrypted Encryption Methods: ESP: AES-128 + MD5 Encryption Scheme: IKE...

Lets say the ISP for the dsl are so dumb that they cant figure this out, and they wont let me get access to the router. 1) if i connect a pc straight into it, how can i tell if its firewalling or stopping something that the vpn1 fw would do? 2) which logs should i be looking out for? im in the...

well heres the other thing, i cant take the vpn off the prim. b/c people use it 24/7. =\ when setting up the ISP redun, + vpn fail over. is the vpn fail over done via the vpn rules or the isp redun?

YES! =) let me try that

no1?

And yet another find. i unchecked the Topology -> ISP Redun and unchecked / VPN "Apply Settings to VPN Traffic" which this is what it said in the manual. ONce unchecvked, the greyed out stuff wasnt greyed out anymore. is this the right step?