Recent content by hectorbest

Thanks Miles, But i wonder if in meridian max was possible have reports with intervals of 5 sec why in symposium not appear in the basic reports, anyway, Are you think that i can obtan a report of all skillset? for example; from 1th April to 30th April in intervals of.. possible not 5 sec but...

Does anyone know if i can make a report like this report of rockwell pbx??? Time <=5 <=10 <=15 <=20 <=25 <=30 <=40 <=50 . .etc 07:30 handled 1 0 0 0 0 0 0 0 ...etc abandoned 0 0 0 0 0 0 0 0 ...etc 08:30 handled 1 0 0 0...

thanks tnphoneman but i have CFF in RDR data and dont function, what else can i change????

Hi Masters, I have a problem with mi callpilot mini on meridian 11c, i try to explain the problems. 1. y made a CCR tree and one option for example option 2 need to tranfer to extension of another PBX (meridian), ej. ext. 2400 and in my PBX the extension are with 40xx, but when a customer...

hi all people, someone know if i can modify the community in succesion 3.0? because in the manual only talk about succesion 4.0 to earlier. anyone know about this because my customer need to change the community but only in the OTM i can change this parameter. best regards. Hector

sorry i forgot to write that the change in your RDR_DATA is for all telephones, usually the most of telephones use CFN0 = RCO 0 then you can change the CFN2 for example to 6, and in your telephone you can put RCO 2, and the HTA, FNA clases of services, besides FDN XXXXX and HUNT XXXX

first you need to check the following commands in your customer data ld 21 RDR_DATA OPT CFO CFRA DSTD PVCA CWRD FNAD FDN FNAT FDN FNAL FDN CFTA YES CCFWDN CFN0 4 (call forwarding for fdn and hunting for example 4 rings) CFN1 6 (call forwarding for fdn and hunting for example 6 rings)...

Hi, try this we have problems but its resolve with this programation CHANNEL D ADAN DCH 37 CTYP MSDL GRP 2 DNUM 11 PORT 1 DES XXXXXXXXXXX USR PRI DCHL 83 OTBF 32 PARM RS422 DTE DRAT 64KC CLOK EXT IFC ISGF PINX_CUST 0 ISDN_MCNT 300 CLID OPT0...

Hi, I have some problems between my pbx and central office, then i need to trace SIZE and SEZA digits from my pbx to the central public `cause i need to modificate the SICA table for a best connection. someone know wich commands i need to introduce on PDT for activate the trace. thanks Hector

we don´t belive that all ring generator cards are bad. but in this moment probe a new card. other part to check????

mmmmm ok i undestand, but then why all the ring generator cards in all superloops look like don´t work, i mean it looks like have only a medium power. it could be a problem with the rectifier or system monitor ? thanks

then what can i do? where is the posible problem?

hi, my customer have a Option 81, and the last saturday turn off the rectifiers the system it was working with only batteries, but those discharging very fast, then the last monday the pbx was down, when the system start up, the led´s on the top of each column is on, the check in the ld 37 the...

thanks a lot.

HI EVERYBODY, I wonder if someone know when upgrade sccs 4.2 to sccs 5.0 i could lost my database or i can be sure that my database will be safe. thanks Hector Carbajal