Recent content by gewt

Hi all, Continuing my "oddities for my Meridian lab" project I snagged an M3000 touchphone off ebay for a reasonable price. Mint condition, only missing a stylus and one other important item. (Did it ship with one?) The other important item I am missing is...a power supply for it. Does anyone...

Turns out it was strange digit modification plan left over from previous configs. Now the issue is: absorb one digit: dialled number: 517 absorb 0 digits: dialled number: 90517 That's 2 digits, ICP.

Hi all - got a 3300 MXe I here w/ a dual T1 framer using only a single digital link, Severity Warning Date 2018/Jul/03 Time 15:38:38 Source Call Control - Software Description EXCEPTION TO waiting 4 outpulse pos-ack, OFFSET 2:$306C, PC: $3546AA LOG_ID: cpxceptn#30, PROCEDURE...

It wasn't behaving with RCAP of NDI; it wanted NDO.

Yep; the Cisco was being a little silly about things - ISO QSIG on meridian with RCAP NDO wants ECMA-style calling party for some reason.

Fixed with: RCAP: NDO cisco side: isdn supp-service name calling profile Network-Extension operation-value-tag ecma GFFAC: 37 24 13 00 9F 00 AA 06 80 01 00 82 01 00 01 00 A1 14 02 01 10 06 04 2B 0C 09 00 80 09 4D 61 69 6E 20 44 65 73 6B

There we go. Now I'm just not getting name display... (of note: I do NOT have a license for NI-2 name display....which is rather annoying) ADAN DCH 10 CTYP MSDL CARD 01 PORT 1 DES Cisco_2851_PRI USR PRI DCHL 1 OTBF 32 PARM RS422 DTE DRAT 64KC CLOK EXT IFC ISGF...

This is to either a non-working number or the T105 test line. I can easily switch to ISGF - thanks. Could there also be some weirdness with my trunk type being set to DID as opposed to say, TIE?

Hi all, On calls to invalid numbers or the 105-type test extension over a PRI, the Meridian sends a cause code back (MSG not compatible with state) instead of the expected cause code. Here's the raw hex trace: DCH 10 IMSG SETUP REF 000080FE CH 1 23 TOD 14:33:56 CK 269A9ABC HEADER:2F 01 00...

Hi all, Is it possible to do conferee display on an M3903 hanging off an 11c? The M3903 manual mentions it but I can't find it in any Input/Output docs. Thanks!

Fixed it. LDN_DATA didn't have the right digit length.

Okay...I'm forgetting something obvious here...haven't touched Meridian things in a bit. I can reach four-digit extensions externally, but not a 7-digit phanton DN. What obvious thing have I forgotten? DCH 10 IMSG SETUP REF 00008090 CH 1 23 TOD 19:58:40 PROGRESS: ORIG ADDR IS NOT ISDN...

I stumbled across a copy of CallPilot 5.0 discs on archive dot org when looking for some documentation very recently, if you can't find those physical copies.

I have, yes. Mine is a much older MICB so the webui isn't the greatest, CLI was mainly used for the error logs.

I have no remote cabinets...wonder what the hell is going on.