Recent content by DesertTech

Got it. Thanks again.

Hi Curlycord, Thanks for getting back to me. I didn't assign the HG to a set. I am using the HG's in the CCR tree only. I've done this many times before without having an HG populate a button on a set and out of the three HG's that I am using only HG:01 took a button.

Hi Everyone, My client has a MICS (30NeG15 NAT) with a CallPilot and T7316 non E phone sets. I was programming the CCR tree to include some Hunt Groups that I created (HG 290, 291, and 292). Everything appeared to work just fine until I found that the X221 DSS button on all of the T7316 phone...

It's worse than that- The installing Tech skipped Ports 1, 2, 5, 6, 5 and 8. I triple checked all the cross connect wires from the KSU to the 110 block. I connected a T7316 at the 110 before it went into the Gateway, and it was good. In addition, I connected a T7316 direct to the Remote units...

My client has two offices. Main office has a Nortel MICS with T7316 sets, this MICS is interfaced with a MCK 6000 utilizing 7 of it's 12 ports which is connected via the router to a 12 port Remote unit at office number 2. The remote is also connected to a router and it serves (7) T7316 sets...

Hi All, I have a few clients with Toshiba CIX100/670 systems. I have been using my old laptop (XP Pro Service pack 2) with an old version of eManager (4.xxx)for years with no problems. I recently upgraded Java to the Version 7 update 45, I believe that screwed up my eManager program. I tried...