Recent content by crocodanser

Here is the network's schema : http://crocodanser.free.fr/Reseau-access-list.JPG Here is the acces-list i want : http://crocodanser.free.fr/access-list.JPG Could you help me please? Thx

i need : - 192.168.161.0/24 can't reach 192.168.61.0/24, 192.168.64.0/24 ... - 192.168.161.250 can access All the websites public on tcp port 80 (permit any) - 192.168.161.250 can access 192.168.0.1 on domain port (tcp and udp) - 192.168.61.0/24, 192.168.64.0/24, ... All the networks can reach...

yes but how can i do to deny all trafic from 192.168.161.0/24 to all network? thx for your help

All other port of this switch are disconnected. router eigrp 100 redistribute static metric 10000 100 255 1 1500 route-map STATIC network 192.168.60.0 network 192.168.62.0 network 192.168.63.0 network 192.168.64.0 network 192.168.65.0 network 192.168.66.0 network 192.168.67.0 network...

Hi, On my switch layer 3, there are many vlans : VLAN Name Status Ports ---- -------------------------------- --------- ------------------------------ 1 default active Gi0/1, Gi0/2, Gi0/3, Gi0/4...

it's all others networks switch is layer 3 Thx for your help

Hi all, I have a question about ACL on vlan interface. My vlan : 161 My network : 192.168.161.0/24 My DNS and Proxy Server : 192.168.161.250 I want to activate an ACL on vlan interface 161. The server can use http protocol to any and Domain protocol to 192.168.0.1 the network...

formation uptime is 1 year, 10 weeks, 23 hours, 56 minutes System returned to ROM by power-on System image file is "flash:c2900XL-c3h2s-mz-120.5-XU.bin" cisco WS-C2912-XL (PowerPC403GA) processor (revision 0x11) with 8192K/1024K byte s of memory. Processor board ID 0x0D, with hardware revision...

Hi all, I monitor the ifInDiscards counter of my cisco switch. This counter is occasionally incremented. I saw this counter is incremeted when there isn't enough space in the buffer. How can i view and resolve this problem? Thx a lot Best regards, Olivier

Hi, Ok i can answer now. This problem came from cross over cable. I used cross over cable since the begining. I tried just one time with a straight cable but with the command speed 100 and the problem was always here. Yesterday, i tried with a straight cable and just forced the duplex in full...

ok i'll try to upgrade ios. Thx a lot

Another Idea?

i use cross over cable. And this cable works fine with my 3750 switch actual. I want to replace it by this 3560. Thx a lot for your help, Best regards, Olivier legras

i tried your answer but that does'nt work... My question was not clear. The problem come from the duplex and the speed. The interface become down when i use this command : speed 100 duplex full And not when i type the trunk command. When i withdraw trunk commands, and i use speed 100 and...

thx a lot for your help. i will try this later. Best regards, Olivier Legras