Recent content by cpux10

Hi Solo82, Please let me know if you have any experience using H.323 gateways with MD110. Thanks

Hi, Has anyone ever tested any third party H.323 gateway with an FXO port on MX-ONE TSW or MD110? Of course we have DRG22i if we want to have FXS ports on the gateway, but what if we need FXO ports?

Syedp, That's how it works. As long as you don't have the sync cable between the boards, you will have no handover, just roaming.

To test, you can use HyperTerminal and in the call menu, select "wait for a call". When the first record arrives, you will get connected and receive the call records from that point on.

Working parameters in MX-ONE 3.2 SP4: ROCAP:ROU=1; ROU SEL TRM SERV NODG DIST DISL TRAF SIG BCAP 1 7120000000000010 5 31100000010 0 30 128 00151515 011100100091 111111 RODAP:ROU=1; ROU TYPE VARC VARI VARO FILTER 1...

Assuming the systems you are connecting using IP networking are both MX-ONE/MD110, try setting ADC D17 and D25 to 0 instead of 1.

print your roddp for the dest tied to this route

What signaling do you use?

The problem is not seen anymore after changing the GJUG5 ports and not using the 4th port! Thanks to everyone for helping.

CNBLI CNBSI CNBCI

Hi, I'm looking for some insight into a problem I'm seeing. I have prepared some MX-ONE servers in different locations for a multi-LIM installation. Now before issuing ts_startup from the first LIM, I was checking the connectivity to the other servers, and I noticed that I cannot ping or ssh...

Is this MX-ONE TSE? If yes, instead of RFPUI you should do restart -unit DOR,OLP1T,OLP1D -lim 1

Thanks a lot himdp! seccheck is indeed causing the problem as I checked in /etc/cron.d, the weekly security check is performed on Mondays at 1 AM which is exactly the time I got the alarms.

Yes it seems that seccheck is enabled. What does seccheck do? Will disabling it do any harm? About antivirus, I haven't installed any antivirus manually unless it is installed by default...

Hi, This is my crontab, I don't think this is causing it, is it?: # DO NOT EDIT THIS FILE - edit the master and reinstall. # (/var/tmp/crontab_new installed on Sun Jan 10 16:28:43 2010) # (Cron version V5.0 -- $Id: crontab.c,v 1.12 2004/01/23 18:56:42 vixie Exp $) 03 03 * * * test -x...