Recent content by c0nverge

hi all at one of my customer site i have been facing issues with 1616 and 1608, some of the phones have stopped working and the moment we plug the phone in the back light starts to flicker and there is no display . i have tried to reset also but the phone responds to nothing. thanks in advance!!!

yes it is the same and what really helped me was that in the "no user" 's source code you will need to make a new code which will help resolve the issue in 4.2.11 the code is " CONFERENCE_DSP_TX_GAIN=-2 " this certainly solve the issue for fine tuning vary the values from -10 to 0

I tried changing it to 100 mbps hail duplex on the phones and voicemail server reduced the noise but its still there. when i turn the recording off the noise and echo is not there and the lines are very silent. moreover i am using the recording with out the contact store license could that also...

Bas1234 can you advice how to change it on the switch side

Thanks for the reply. Im using a mixer of IP Phones on the site ie. 4625 and 5620.

Hi Friends I have a very severe issue of echo and noise when i activate call recording option using voicemail pro in IPOffice 500 version 4.2.11 system the noise only comes on external calls on analog lines , in internal calls the voice is perfect. i had grounded the device and also tried...

thanks i ll try this

Hi friends is there a way in IPO 500 that we can add a prefix which is dialed automatically by the system once we take an outside line. i had created the following short code code 900N tel 00N feature dial now the customer has a device which route the calls thru a different channel once a...

Thanks a lot bas1234. I will try this and i feel this will really help

i have tries a lot of setting but none work but let me try what you have said intrigrant , thanks

Hi Friend I have a problem with call forwarding option. Im using a IPO500 version 4.2.11 . when i forward my calls to an external mobile no. the lines seems to be in connected mode for eternity even if the call has been completed and disconnected from both the ends , the line is still in the...

Hi friends Is there a way in IP Office 500 to make the external music on hold to be played from the beginning, the message is recorded on cd in .wav format which is supported by VM Pro.